Page 31 - QR KLINDEX EXPANDER850AT-RXt

ASSEMBLY, TRANSPORTATION AND STORAGE

5 Assembly, transportation 5.1.2 Fitting and adjusting the handle grip
and storage
To reduce the overall dimensions during transport,
5.1 Assembly the handle grip is removed from the appliance. Be-
fore operating the appliance, the handle grip needs
l NOTICE to be refitted.
Before performing any operation on the
appliance, make sure that the main dial is Handle grip assembly
set to “OFF”. Follow the indications provided below carefully:
– introduce the handle grip (1) into the joint as indi-

cated in the figure
– insert the pin (2) into the central hole and lock it us-

ing the cotter pin (3)

5.1.1 Fitting/removing the caster wheel 1

The caster wheel (1) is needed for transporting the A
appliance and lightening the contact pressure of the B2
appliance in some applications. Assembly and dis-
mantling is easy: simply loosen or tighten the lever (2). C
3
l NOTICE
To disassemble the caster wheel, lower
the carriage fully until the planetary is in
contact with the floor.

2B

– lastly, insert the pin (4) into one of the holes and
lock it using the cotter pin (5).

A1 4 5
D E

l NOTICE l NOTICE
The caster wheel must only be fitted to Make sure that the pin is inserted fully be-
move the appliance a short distance with- fore starting any operation.
in the working area or to move it from
the vehicle it was transported to the work
area.

www.klindex.com - Made in Italy 17