Page 33 - QR KLINDEX EXPANDER850AT-RXt

ASSEMBLY, TRANSPORTATION AND STORAGE

5.2 Weights kit (optional) – insert the pins (3) into the two housings ensuring
that the hole at the end of the pin protrudes fully
The appliance is pre-installed to house additional from the support
weights (these can be ordered upon request). De-
pending on specific requirements, the weights can be 4
easily moved and safely fixed to the appliance in the
three positions indicated below.

B
A

C

3

A At the front, this position increases adherence of – insert the safety clips (4) into the hole of the pin and
the tools during processing bending them, position the end of the spring in the
grooving on the pin head.
B In the middle, this position reduces the load on the 4
motor
Rear position
C At the rear, this position makes it easier to upturn To secure the weights at the rear, act as follows:
the appliance – hook the two weights (1) to the supports (2) using

a WARNING the two slots on the bottom of the weight
Pay careful attention while moving the 1
weights as there is the risk of crushing.

Front and middle position
To secure the weights at the front or in the middle, act
as follows:
– hook the two weights (1) to the supports (2) using

the two slots on the top of the weight

2

2

1 2
2
l WARNINGS
– Always position the weights in corre-
sponding positions on both sides.

www.klindex.com - Made in Italy 19