Page 36 - QR KLINDEX EXPANDER850AT-RXt

ASSEMBLY, TRANSPORTATION AND STORAGE

When the radio control is switched on, it is pro- l NOTICE
grammed to operate in manual mode. If the mode dial – With the appliance connected to the
is not set to "MANUAL MODE", the message “MANU- mains power supply, make sure that
AL (SET THE KEY)” will appear on the display to inform once the direction of rotation has been
the operator that the appliance is working in manual selected, the planetary begins to turn. If
mode even if the dial is set to a different position. the appliance is powered by the battery,
the planetary remains stationary.
SEMIAUTOMATIC
PAUSE If the yellow battery status LED flashes, replace and
recharge the battery as described in the section "Re-
MANUAL AUTOMATIC MANUAL (SET THE KEY) placing the radio control battery" on page 16.
RESET RECORD SP: * * * * * Hz TT: * * * * *
SW: * * * * * OL: * * * * * – Using the joystick, raise or lower the planetary to
WB: * * * * * V prevent any damage to the cutters

MODE – select the most suitable speed on the basis of the
incline and distance to be travelled; lever up, maxi-
– set the dial to "MANUAL MODE" in order to restore mum speed; lever in the intermediate position, me-
correct operation of the radio control dium speed; lever down, minimum speed.

– the word “MANUAL” will appear on the display. UP FAST

SEMIAUTOMATIC
PAUSE

MANUAL AUTOMATIC MANUAL TT: * * * * * MEDIUM
RESET RECORD SP: * * * * * Hz OL: * * * * *
SW: * * * * * **********
WB: * * * * *

MODE DOWN SLOW

With the main dial set to "Transport Mode", the mes- – move the appliance with the directional joystick.
sage "PL NOT RDY" will appear on the display. In this
case, it indicates that the functions relating to the
planetary are not active

OFF MANUAL (SET THE KEY)
12 SP: * * * * * Hz TT: * * * * *
SW: * * * * * OL: * * * * *
WB: * * * * * PL NOT RDY If the radio control is not used for at least 3 min-
utes, it will deactivate (the green TX LED goes off).
To restore operation, press and hold the rest but-
ton on the right side of the radio control for ap-
proximately 3 seconds.

With the main dial set to "Grinding", the message
"PLAN READY" will appear on the display. In this case,
it indicates that the functions relating to the planetary
are active.

OFF MANUAL (SET THE KEY)
12 SP: * * * * * Hz TT: * * * * *
SW: * * * * * OL: * * * * *
WB: * * * * * PLAN READY

22 www.klindex.com - Made in Italy