Page 40 - QR KLINDEX EXPANDER850AT-RXt

SAFETY DEVICES OF THE APPLIANCE

Control button panel – release the emergency button by turning it to the
– Press the emergency button on the control panel, right and check that the emergency button stops
flashing.
the blue reset LED activates while the green LED
stays on Radio control button
– to start the appliance again, first of all restore the – Press and quickly release the reset button to switch
emergency button of the control panel, the blue
reset LED deactivates. Then select the direction of on the radio control, the display will activate
rotation of the planetary passing through the stop
position.

l NOTICE
The emergency buttons must not be used
to stop the appliance in normal conditions
of use. They must only be used in the
event of a hazard or malfunctions.

7.3.2 Verification of the emergency buttons **********************
To check operation of the emergency buttons, act as SP: * * * * * Hz TT. * * * * *
follows: SW: * * * * * OL: * * * * *
– check that none of the emergency buttons on the WB: * * * * * * * * * * * * * * *

appliance is pressed by turning them in a clockwise – the radio control is now fully operational
direction – press the emergency button, the radio control
– turn the main dial on the electric panel to the left
and set it to "1" (Transport mode). The green "PLC switches off. If the appliance is moving, or if it is in
ready" light and the "Transport mode" light on the operation, it will stop
electric panel will both activate.

OFF
12

a WARNING STOP
The appliance is in operation during the
emergency button check. Pay careful at- – release the emergency button by turning it to the
tention. right

Button on the electric panel – reactivate the radio control following the procedure
– Press the emergency button on the electric panel indicated previously.

and check that the emergency button starts flash-
ing. If the appliance is moving, or if it is in operation,
it will stop

STOP

26 www.klindex.com - Made in Italy