Page 7 - Operators Manual Trailing 6-8m

Rocca Industries Pty Ltd • 170 Graham Road, Tolga, QLD 4882 Australia • Ph: +61 7 4095 5050

tractor and SupaTill will help prevent accidents.
4. Never allow machine to be operated by anyone unfamiliar with operation of all functions of the unit.

Operators must read and thoroughly understand all instructions given in this manual before operating

or working on equipment.
5. Be aware of bystanders.
6. Ensure the unit weight does not exceed towing capacity of the tractor, or bridge and road limits.

7. Never ride or allow others to ride on the SupaTill.

8. Keeps hands, feet and clothing away from moving parts.
9. Do not allow anyone to stand between tongue or hitch and towing vehicle when backing up to the
unit.

10. Watch for obstructions such as wires, tree limbs, etc. when operating the machine. Be aware of

clearances during turns.
11. Follow all federal, state/provincial/territorial and local regulations when towing farm equipment on a
public roadway.

12. Make sure all safety/warning signs, and reflective decals are in place, clean, visible and readable

before transporting the machine on public roads.

3. Inspection – First Delivery

The following information is general in nature to aid in the setup and preparation of the tractor and machine

for use. Operator experience, familiarity with the machine, and the following information should combine to
produce efficient machine operation and good working habits.

When your machine has arrived, perform a visual inspection to ensure no damage has occurred to the
machine during transportation. Notify your nearest Rocca Dealer or Rocca Industries Pty Ltd immediately if
the visual inspection results in detected/observed damage. Only by providing immediate notification will

repairs or replacement of parts be provided under warranty.

Before use
1. Always ensure the area around operations is clear and no unauthorized persons are present.
2. Always perform pre-operation visual check.

3. Always perform pre-use functional checks (cylinders and hoses are shipped with no fluid).
4. Use the machine only in accordance with the designed intent of the machine.

7