Page 1580 - Workshop Manual - Aumark (BJ1051)

77-38
Internal/external trimming parts-front mask

(c). Remove the 2 fixing nuts in the middle
of the front mask assembly.
(d). Disconnect the connection buckle of the
front mask.

6. Install the front mask assembly
(a). Connect the buckle of the front mask and
install the front mask assembly to the
correct position.
(b). Screw on the 2 fixing nuts in the middle
of the front mask as shown in the
77 illustration and screw down all of them
after installing all the nuts.
Notice:
The buckle of the front mask is a disposable
part and a new one shall be replaced with
during the installation.

(c). Install the 2 fixing nuts at the left side of
the front mask.
(d). Install the 2 fixing nuts at the right side
of the front mask.

Hint:
The steps for the installation of the fixing nuts at
the right side of the front mask are the same with
those for the left one.
7. Install the cover plate of the left
rearview mirror
(a). Install the cover plate of the left rearview
mirror and screw down the 2 fixing nuts.

Page 1580