Page 17 - Workshop Manual - Aumark (BJ1051)

01-11
Introduction-General Rules for Maintenance Operations

Shape(Example) Removal/installation

disassembly installation

installation
disassembly

01

(h) Removing and installing a vacuum hose
• When removing and installing a vacuum
hose, be sure to hold on its end. Never
pull its middle.

wrong right

• When disconnecting a vacuum hose
connector, mark it with a label for
identification during line connection.

• After a removal and installation is
completed, be sure to check the vacuum
hose carefully for correct connection.
• In the case of an oversize connector when a
vacuum pressure gauge is used, never
connect the vacuum hose with the gauge
directly. Instead, you must use a special
adapter to adjust. Once the vacuum hose is
expanded, air leak may result.

Page 17