Page 41 - SILENT BLOKOVI I GUMICE KLANN

Kapitel_4.fm Seite 177 Montag, 10. April 2017 7:14 07

Mercedes

KL-0039-750 (Pat. e.g. US-Patent 7,020,944) KL-0039-750
Pressing Device with Hydraulic Cylinder,
Mercedes Sprinter/VW LT (2D)
KL-0039-7500
Designed to change suspension ball joints on Mercedes Sprinter (901-904)
models from 1995-2006 and on VW LT (2D) models from 1996-2006.
Used in conjunction with the hydraulic pump KL-0215-35 M25 or KL-0215-37 M25,
the pressing device KL-0039-750 enables the quick and trouble-free pushing out
and pressing in of the suspension ball joints on the lower wishbone. Removal and
installation of the ball joints can be performed in situ on the vehicle within a just few
minutes, without having to dismantle the wishbone.

Note:
Mercedes Sprinter and VW LT are fitted with two different wishbones with two different KL-0039-7503
suspension ball joints.

Scope of Delivery:
KL-0039-750 Pressing Device with Hydr. Cyl., Mercedes Sprinter/VW LT (2D)
Part-No. Description Qty
KL-0039-7500 Pressing Device without Hydraulic Cylinder, Mercedes Sprinter 1
4
KL-0040-2500 Hydraulic Cylinder (17t) 1
Scope of Delivery:
KL-0039-7500 Pressing Device without Hydr. Cyl., Mercedes Sprinter/VW LT (2D)
Part No: Description Qty
KL-0039-7503 Sleeve Set, Mercedes Sprinter 1
KL-0039-1140 Press Frame, (lightweight, short) 1
KL-0039-1002 Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle 1
KL-0039-1930 Pressure Spindle, M20x350mm, with O-Ring 1

Scope of Delivery:
KL-0039-7503 Sleeve Set, Mercedes Sprinter/VW LT (2D)
Part No. Description Qty
KL-0039-1823 Support Sleeves with Clamping Disc for Mercedes Sprinter 1
KL-0039-1662 Pressure/Support Sleeve, short, Ø 62mm 1
KL-0039-1762 Pressure/Support Sleeve, long, Ø 62mm 1
KL-0039-1824 Pressure Sleeve 1

Ball joint Ball joint
extraction insertion

KL-0039-7535 (Pat. e.g. US-Patent 7,020,944) KL-0039-7535
Upgrade Kit for KL-0039-750,

Mercedes Sprinter (W906)/VW Crafter (2E/2F)

Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter
(2E/2F) from 2006 onwards, suspension ball joints on the front lower wishbone.
The upgrade kit KL-0039-7535 enables the pressing device KL-0039-750 also to be
used on Mercedes Sprinter (W906) models from 2006 onwards and VW Crafter (2E/2F)
models from 2006 onwards.

Scope of Delivery:
KL-0039-7535 Upgrade Kit for KL-0039-750
Part No. Description Qty
KL-0039-1828-1 Support Sleeve for Shoulder Ø 60mm 1
KL-0039-1829 Pressure Sleeve 1

Copyright GEDORE Automotive GmbH, Germany (177) 4-41
formerly