Page 50 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 294 Montag, 10. April 2017 11:05 11

Engine
Injection System

KL-1683-103
KL-1683-103
Cleaning Tool for Injector Nozzle Seat

Applicable to Common Rail Diesel engines on Opel/Vauxhall, Fiat, Lancia, Suzuki
1.3 JTD, 1.3 CDTi, 1.3 JTD, 1.3 DDis / engine: Z13DT, 188A9.000.
In a single machining operation, the specially shaped cleaning tool produces a clean
Technical Data:
finish on the injector mounting hole, the nozzle seal seat and the small aperture leading
Drive: T-handle
to the combustion chamber.
Length: 261mm
Indispensable procedure before re-installing/installing an injection nozzle to avoid
Cleaning tool Ø: 7.5/17/17.6mm leakage between cylinder head and injector nozzle.
KL-1283-112
KL-1283-112
Cleaning Tool for Injector Nozzle Seat,

Renault/Nissan/Opel/Vauxhall/Suzuki/Mitsubishi
Suitable for the Common Rail Diesel engines F9Q on Renault, Nissan, Opel/
Technical Data: Vauxhall, Suzuki, Mitsubishi 1.9 dTi, 1.9 dCi, 1.9 CDTI, 1.9 Di, 1.9 DDis, 1.9 Di-D.
Drive: T-handle In a single machining operation, the specially shaped cleaning tool produces a clean
Length: 245mm finish on the injector mounting hole, the nozzle seal seat and the small aperture leading
Cleaning tool Ø: 7.5/17.4/19mm to the combustion chamber. Indispensable procedure before re-installing an injection
nozzle to avoid leakage between cylinder head and injection nozzle.

KL-1283-122
KL-1283-122
Cleaning Tool for Injector Nozzle Seat,

Renault/Suzuki/Nissan/Dacia
Suitable for the Common Rail Diesel engines K9K on Renault, Suzuki, Nissan,
Technical Data: Dacia 1.5 dCi, 1.5 DDis.
Drive: T-handle In a single machining operation, the specially shaped cleaning tool produces a clean
Length: 265mm finish on the injector mounting hole, the nozzle seal seat and the small aperture leading
Cleaning tool Ø: 7.5/17/20.1mm to the combustion chamber. Indispensable procedure before re-installing/installing an
6 injection nozzle to avoid leakage between cylinder head and injection nozzle.

KL-1383-104
KL-1383-104
Cleaning Tool for Injector Nozzle Seat,
Peugeot/Citroën/Fiat/Lancia/Suzuki

Applicable to 2.0 HDI, 2.0 JTD Common Rail Diesel engines on Peugeot, Citroën,
Fiat, Lancia, Suzuki; engine code: DW10; Mercedes, engine code: OM646 EVO;
Renault, Nissan, Vauxhall/Opel 2.2 DTI, CDTI, CDI, engine code: G9T; Renault,
Nissan, Vauxhall/Opel 2.5 DTI, CDTI, CDI, engine code: G9U.
Technical Data:
The special design of this cleaning tool enables the injection nozzle bore, the seal seat
Drive: T-Handle
and the injector channel to be cleaned in one single operation.
Length: 261mm
Important! Before any re-installation/installation of an injector, it is essential to clean
Cleaning tool Ø: 7.5/17mm
the seal seat in the cylinder head from deposits such as carbon deposits in order to
prevent leakage between cylinder head and injector.
KL-1383-119
KL-1383-119
Cleaning Tool for Injector Nozzle Seat,
Peugeot/Citroën/Fiat/Lancia
Applicable to the 2.2 HDI, 2.2 JTD Common Rail Diesel engines DW12 on Peugeot,
Citroën, Fiat, Lancia.
Technical Data:
In a single machining operation, the specially shaped cleaning tool produces a clean
Drive: T-handle
finish on the injector mounting hole, the nozzle seal seat and the small aperture leading
Length: 275mm
to the combustion chamber. Indispensable procedure before re-installing/installing an
Cleaning tool Ø: 7.5/17/19.6mm
injector nozzle to avoid leakage between cylinder head and injector nozzle.

Copyright GEDORE Automotive GmbH, Germany
formerly