Page 48 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 292 Montag, 10. April 2017 11:05 11

Engine
Injection System

KL-0186-501
KL-0186-501
Extension (150mm)

The KL-0186-501 extension is specially designed for very deep-seated injector
nozzles. It is used in conjunction with the universal cleaning tool KL-0186-50 or the
KL-0186-511.

Technical Data:
Drive: T-Handle
Lenght: 150mm

KL-0186-52 (German Utility Model)
KL-0186-52
Cleaning Tool for Injector Nozzle Seat, VW
Universally suitable for the VW-Audi, Seat, Škoda 2.0 TDI Pumpe-Düse (unit
injector) engines having a conical injector nozzle seat Ø of 17mm, as found on
VW: Caddy III, Eos, Golf Plus, Golf V, Golf VI Variant, Jetta, Passat, Passat Variant,
Touran; Audi: A3; Seat: Altea, Leon, Toledo III; Škoda: Octavia, Superb. (Engine
code: BMM)
The cleaning tool enables the quick and professional cleaning of conical injector
nozzle seats.
This is an indispensable working step before installing/re-installing an injector nozzle
in order to avoid leakage between cylinder head and injector nozzle.
The spring-loaded centring cone sleeve ensures accurate guiding of the cleaning tool
in the injector nozzle bore, thus enabling the seal seat to be cleaned properly and
without any trouble.

Technical Data:
Drive: T-Handle
Length: 238mm
Cleaning tool Ø: 7.5/17mm
6 KL-0186-53 K KL-0186-53 K (German Utility Model)

Cleaning Tool Set (Universal)

for Injector Nozzle Seat

Universally suitable for the VW-Audi, Seat, Škoda, Citroën, BMW, Ford, Land
Rover, Mazda, Mercedes, Opel/Vauxhall, Peugeot, Renault, Toyota, Volvo Diesel
engines having a plane injector nozzle seat Ø of 17mm; also suitable for use on
the VW-Audi, Seat, Škoda 2.0 TDI Pumpe-Düse (unit injector) engines having a
conical injector nozzle seat Ø of 17mm.
(Engine codes: VW-Audi/Seat/Škoda: AXD, BAY, BLE, BNZ, BNM, BMM, BNV,
BKC, BWF, BXE, BLS; Mercedes: OM611, OM612, OM613, OM640, OM642,
OM646, OM646 EVO, OM647, OM648, OM668; Peugeot: DT17, DT20, DV4, DV6,
Technical Data: DW10, DW12; Citroën: DV4; Renault: F9Q, G9T, G9U, K9K; BMW: M47, M47TU,
M57, M57TU; Opel/Vauxhall: Z13DT; Ford: G8DA, G8DB, HHDA, HHJA, HHJB;
Drive: T-Handle
Volvo: D4164T; Mazda: Y6; Toyota: 2AD-FTV, 1KD-FTV; Land Rover: TD4, M47D)
Length: 238mm
Cleaning tool Ø: 7.5/17mm The cleaning tool set enables the quick and professional cleaning of both plane and
conical injector nozzle seats. Proper and thorough cleaning is essential before
installing/re-installing an injector nozzle in order to avoid leakage between cylinder
head and injector nozzle. The spring-loaded centring cone sleeve ensures accurate
guidance of the cleaning tool in the injector nozzle bore, thus enabling both the
plane and the conical seal seat to be cleaned properly and without any trouble.
Note: The cleaning tool set includes the KL-0186-52 cleaning tool.

Scope of Delivery: KL-0186-53 K Cleaning Tool Set (Universal)
Part No. Description Qty
KL-0186-50 B Cleaning Tool for Injector Nozzle Seat 1
Cleaning Head, Ø 7.5/17 mm 1
KL-1383-1329 Plastic Storage Case 1

Copyright GEDORE Automotive GmbH, Germany
formerly