Page 44 - MOTOR-SISTEM UBRIZGAVANJA KLANN
P. 44
Kapitel_6_3-4.fm Seite 288 Montag, 10. April 2017 11:05 11
Engine
Injection System, Renault / Opel/Vauxhall
KL-0186-1234
KL-0186-1234
Set of Support Bolts,
M6 (113.5mm and 153.5mm)
Applicable to Renault, Nissan, Opel/Vauxhall 2.2 and 2.5 dCi Diesel engines
(engine code: G9T and G9U) e.g. Renault: Avantime, Espace III, Espace IV,
Laguna II, Master II, Master III, Traffic II, Vel Satis; Nissan: Interstar, Primastar
and Vauxhall/Opel Movano, Vivaro.
The KL-0186-1234 support bolt set upgrades the injector nozzle puller set
KL-0186-14 K by making it also suitable for use on the above mentioned engines.
Scope of Delivery:
KL-0186-1234 Set of Support Bolts M6 (113.5mm and 153.5mm)
Part No. Description Qty
KL-0186-1234-1 Support Bolt, 113.5mm 2
KL-0186-1234-2 Support Bolt, 153.5mm 2
KL-1283-112
KL-1283-112
Cleaning Tool for Injector Nozzle Seat,
Renault/Nissan/Opel/Vauxhall/Suzuki/Mitsubishi
Suitable for the Common Rail Diesel engines F9Q on Renault, Nissan, Opel/
Vauxhall, Suzuki, Mitsubishi 1.9 dTi, 1.9 dCi, 1.9 CDTI, 1.9 Di, 1.9 DDis, 1.9 Di-D.
Technical Data: In a single machining operation, the specially shaped cleaning tool produces a clean
finish on the injector mounting hole, the nozzle seal seat and the small aperture
Drive: T-handle
leading to the combustion chamber.
Length: 245mm
Indispensable procedure before re-installing an injection nozzle to avoid leakage
Cleaning tool Ø: 7.5/17.4/19mm
between cylinder head and injection nozzle.
6
KL-1283-122
KL-1283-122
Cleaning Tool for Injector Nozzle Seat,
Renault/Suzuki/Nissan/Dacia
Suitable for the Common Rail Diesel engines K9K on Renault, Suzuki, Nissan,
Dacia 1.5 dCi, 1.5 DDis.
In a single machining operation, the specially shaped cleaning tool produces a clean
finish on the injector mounting hole, the nozzle seal seat and the small aperture
Technical Data:
leading to the combustion chamber.
Drive: T-handle Indispensable procedure before re-installing/installing an injection nozzle to avoid
Length: 265mm leakage between cylinder head and injection nozzle.
Cleaning tool Ø: 7.5/17/20.1mm
Copyright GEDORE Automotive GmbH, Germany
formerly
