Page 39 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 283 Montag, 10. April 2017 11:05 11

Injection System, PSA

KL-1683-30 K KL-1683-30 K
Injector Clamp Screw Drill-Out Tool Kit,
Citroën, Peugeot, Fiat, Iveco 2.3, 3.0 HDI/JTD/HPI

Suitable for use on Citroën and Peugeot 3.0 HDI, as well as Fiat and Iveco 2.3, 3.0
JTD/HPI Common Rail Diesel engines; for example, as fitted to: Citroën Relay/
Jumper III; Peugeot Boxer III; Fiat Ducato and Iveco Daily. (Engine codes:
F1AE0481A, F1AE0481B, F1AE0481C, F1AE0481D, F1AE0481F, F1AE0481FA,
F1AE0481G, F1AE0481GA, F1AE0481H, F1AE0481HA, F1AE0481N, F1AE0481R,
F1AE0481RA, F1AE0481UA, F1AE0481VA, F1CE0481A, F1CE0481B, F1CE0481D,
F1CE0481F, F1CE0481H, F1CE3481E, F1CE3481M, F1CE3481N, F30DTE [F1CE
0481D, F1CE 3481D, F1CE 3481DM, F1CE 3481E, F1CE 3481N])
The KL-1683-30 K injector clamp screw drill-out tool kit enables the accurate
removal respectively drilling out of torn-off screws that hold the injector clamp in
place, as well as re-cutting the original M8x1.25 thread.
It also allows the user to repair a damaged M8x1.25 injector clamp screw retaining
thread by drilling it up to M10x1.25. Then, the new injector clamp screw along with a
threaded sleeve (M10x1.25 to M8x1.25) can be screwed into the cylinder head.

Technical Data:
For clamp screw thread: M8x1.25

Scope of Delivery:
KL-1683-30 K Injector Clamp Screw Drill-Out Tool Kit
Part No. Description Qty
Base Tool 1
Drill Sleeve, Ø 6.8mm 1
Pilot Drill, Ø 6.8mm 1
Drill Sleeve, Ø 10.1mm 1
Re-Bore Drill, Ø 10.1mm 1
Screw Tap, M8 1
Drill Sleeve, Ø 9.1mm 1
Pilot Drill, Ø 9.1mm 1
Screw Tap, M10x1.25 1 6
Set of Threaded Sleeves, M8 1
Stud Remover/Installer, 8mm 1
Flexible Magnetic Lifter 1
Plastic Storage Case 1

Copyright GEDORE Automotive GmbH, Germany
formerly