Page 102 - Patty Hahne "The Pocket Guide to Prepper Knots"

2. Next pass the work-
ing end in front of the
standing part as illus-
trated in figure 26b.

3. Thread the working
end through the loop
you created and pull
the first half hitch tight
as illustrated in figure Figure 26b.
26c. Note that this
is simply an overhand
knot that is tied around
something.

4. Pass the working end
around the standing part
again, but this time the
wrap should be on the
outside of the loop. This
is illustrated in figure 26d.

5. Threading the working
end through the second
loop you just created
forms the second half
hitch.
Figure 26c.

96 The Pocket Guide to Prepper Knots