Page 42 - Final Report - KAUSC Team
P. 42
KAUSC Team
3 Chapter three: Technical design
3.1 Frame design
In this section. The design steps of the frame will be discussed in detail. The first thing is
to find an existed frame design, to reduce the time for designing a new frame from scratch.
So, by applied a reverse engineering on a frame was found in the senior project workshop
that has similar dimensions to the desired ones with the reference of Shell-Echo Marathon
rules (SEM). Here is the final drawing of the existed frame Figure.
Figure 9 frame of car in workshop
By applied some adjustments to the design to make it easier to manufacture and applicable
to the SEM rules Figure 9.
Figure 10 after adjustment
41 | P a g e
