Page 32 - scales manual v1014 web
P. 32
DIGI DC-688
1. Press the [SPAN] Switch which is located at the bottom of the machine.
2. Enter [8] [7] [1] [5] while depressing the [REZERO] Key. The
display will show CAL00
3. Press the [∗] Key in order to compute the zero point. It takes a
few seconds for the zero calibration.
4. After computing the zero point, the Weight Window shows CALSP
5. Place capacity weight of 60 lb on the platter. In this illustration,
capacity weight of 60 lb is taken as an example.
OR ---
6. Using less than capacity weight .Enter the weight placed on the platter using the
[Numeric]
Keys. Example: enter [5][0][.][0][0]
7. Press the [∗] Key to start span calibration.
DIGI-STAR EZ-2000
1. Press and Hold NET/GROSS and press ON
2. Press SELECT to go to CAL and press ON
3. Select CALIBRATE
4. TCALB—Press ON
5. Place Weight and Press ON
6. If weight is at least 5%, CAL will be displayed
7. Estimated weight is displayed, adjust using the SELECT and FUNCTION keys
8. When desired weight is displayed press the ON key
9. GOOD is displayed then back to weigh mode
© 2014 ScaleResource.com Page 32
1. Press the [SPAN] Switch which is located at the bottom of the machine.
2. Enter [8] [7] [1] [5] while depressing the [REZERO] Key. The
display will show CAL00
3. Press the [∗] Key in order to compute the zero point. It takes a
few seconds for the zero calibration.
4. After computing the zero point, the Weight Window shows CALSP
5. Place capacity weight of 60 lb on the platter. In this illustration,
capacity weight of 60 lb is taken as an example.
OR ---
6. Using less than capacity weight .Enter the weight placed on the platter using the
[Numeric]
Keys. Example: enter [5][0][.][0][0]
7. Press the [∗] Key to start span calibration.
DIGI-STAR EZ-2000
1. Press and Hold NET/GROSS and press ON
2. Press SELECT to go to CAL and press ON
3. Select CALIBRATE
4. TCALB—Press ON
5. Place Weight and Press ON
6. If weight is at least 5%, CAL will be displayed
7. Estimated weight is displayed, adjust using the SELECT and FUNCTION keys
8. When desired weight is displayed press the ON key
9. GOOD is displayed then back to weigh mode
© 2014 ScaleResource.com Page 32
