Page 1069 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1069
8.18
Figure 8-33. Positive Cable Routing 2 Battery negative terminal Battery positive terminal Figure 8-34. Battery Terminals 1WARNING 1WARNING After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control, which could result in death
1 3 Negative cable or serious injury. (00070a) Install seat.
s0192x5x 11811 1. 2. 3. 6.
These
BATTERY CABLES ROUTING PROCEDURE Install battery. See 1.5 BATTERY MAINTENANCE. See Figure 8-34. Route positive cable down from battery positive terminal down past tab on battery tray to starter post on right side of chassis. Figure 8-32. Battery Tray: Shown From Front 1WARNING 1WARNING Make sure the starter solenoid terminal that is connected to the positive (+) battery cable is securely covered by the rubber boot. An uncovered terminal could short against other components resulting in sparks. sparks could cause a fire or battery explosion which could result in death or serious injury. See Figure 8-33. Install positive cable. Install positive c
HOME Remove seat. 1. 2. 3. s0385x1x 4. a. b. c. 5. a. b. 8-30

