Page 658 - 2006 HARLEY FLSTCI SERVICE MANUAL

2.4 2-9

Long mounting bolt (12 pt/10 mm) Short mounting bolt (12 pt/10 mm) Axle nut, lockwasher and washer 1 Slider cap nuts and washers
FRONT WHEEL: ALL BUT FLSTSC/FXSTS/FXSTD
1 Figure 2-3. Caliper Mounting Bolts: All but FLSTSC, 2 2 2006 Softail: Chassis

2 FXSTS, FXSTD (Left Side) Figure 2-4. Front Wheel Mounting All but FLSTSC, FXSTS, FXSTD (Right Side)

3

10602 1. 2. 3. 7497 Axle 1. 2.

See Figure 2-3. Remove brake caliper. Support caliper
Inspect wheel bearing end play and service bearings if
Block motorcycle underneath frame so front wheel is
using a rubber bungee cord. Be careful not to scratch the
necessary. See 2.9 SEALED WHEEL BEARINGS.

NOTE Do not operate front brake lever with the front wheel removed or the caliper piston may be forced out of piston bore. Reseat- ing the piston requires disassembly of the caliper. Remove axle nut, lockwasher and washer (3). Label wheel spacers for location (left or right) and orien- tation (fork side or wheel side). See Figure 2-4. Loosen the slider cap nuts (2) and pull NOTE On FLSTC models, the hub cap will come off with the wheel. NOTE See 2.14 TIRES to service tire or valve stem assembly. See Figure 2-5. Remove spacers (2, 8) from left and right If necessary, remove brake disc (9) and/or hub plate (6). Label

REMOVAL raised off the ground. fender paint. the axle (1) free. Remove wheel from forks. DISASSEMBLY Disc Wheel sides. nal locations. a. b. Laced Wheel brake disc (8).

HOME 1. 2. 3. 4. 5. 6. 7. 1. 2. 1. 2. 3.