Page 733 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 733

s0350x2x



                                                                                                                                 3
                                                                                                                   2
                                                                                    2
               Spring cup, compression spring (2) Compression spring, outer (2)  Compression spring, inner (4) Spring rod assembly (2)  Front shock absorber Acorn nut, lower spring rod (2)  Lower bearing dust shield Roller bearing with cup (2) Upper bearing dust shield  NOTE  front shock absorber sticker  bumper for the rigid fork  Acorn nuts and washers  Screws and washers Front shock absorber  Figure 2-100. Shock Absorber

















               20.  21.  Reflector (2)  22.  Rigid fork  23.  24.  25.  Spring seat (4)  26.  27.  28.  Spring fork  29.  30.  31.  32.  Parts are not shown:  ●  ● Legend For Figure 2-99. Front Fork: FLSTSC/FXSTS  1.  2.  3.  1  1


                                                                                                             forks which can adversely affect performance and han-
                                                                                                           Do not use aftermarket parts and custom made front
                                                                                           Remove both screws and washers (2). Remove front
                                                                                                                       Apply LOCTITE  THREADLOCKER 243 (blue) to screws (2). Place shock absorber (3) in position in bracket holes and install screws, washers and acorn nuts. Tighten acorn nuts to 45-50 ft-lbs (61.0-67.8  CAUTION Be sure there is no free play between shock absorber eyes and shock absorber brackets. Free play between shock absorber eyes and shock absorber brackets indi-
                                                                                                                  adversely affect performance and could result in death or
                                                                                                               dling. Removing or altering factory installed parts can
                                                                                   The shock absorber does not have a spring, so there is no
                                                                                        See Figure 2-100. Remove acorn nuts and washers (1).


                                                                                                       11WARNING
                                                                                                       1WARNING
                                                                                NOTE




               Acorn nut (2) Spring rod washer (2)  Spring bridge Spring bridge restraint, upper (2) Rebound spring, top (2) Acorn nut with washer (2)  Rubber washer  Screw  Upper triple clamp Steering head bearing retainer Spring cup, rebound spring (2) Travel bumper, upper (2) Spring rod bushing (2) Screw and lockwasher  Screw  Screw and washer Acorn nut and washer (4) Steering stem retaining ring Travel bumper, lower (2)  FRONT SHOCK ABSORBER  shock absorber (3).  serious injury. (00001a)  Figure 2-100.   cates incorrect shock absorber usage.  2006 Softail: Chassis





          HOME  1.  2.  3.  4.  5.  6.  7.  8.  9.  10.  11.  12.  13.  14.  15.  16.  17.  18.  19.  Removal  pre-load.  Installation  See   Nm).
                                                                                        1.  2.                         1.                                        2-84
   728   729   730   731   732   733   734   735   736   737   738