Page 736 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 736

See Figure 2-106. Remove compression spring cups (2)
                and lower rubber travel bumpers (1). Remove outer com-
                                                                                                                                                                 2-87

                     Remove inner/upper compression springs (4).

                                                                                               1




                        NOTE Rotate spring to position that allows the easiest access through the coils to cross-hole at the bottom of the lower Insert a # 2 Phillips head screwdriver in the cross-hole at the bottom of the lower spring rod (5) and loosen long acorn nuts (8). Remove screwdriver. Remove the long acorn nuts and spring rod assemblies. Remove spring seats (6) and inner/lower compression  CAUTION DO NOT remove the upper spring rods from the lower spring rods. If either the upper spring rod(s) or the lower spring rod(s) are damaged, replace as an assembly.  Spring   fork leg  2  Figure 2-105. Rocker Assembly  2006 Softail: Chassis


                  pression springs (3).       springs (7) from spring rod (5).  Rigid  fork leg  3  4     Rocker pivot stud  Rocker  Washer









              14.    15.       spring rod.  16.  17.              s0355x2x                                1.  2.  3.  Nut  4.  s0353x2x











                                                      Spring rod washer (2)  Spring bridge restraint,   Rebound spring, top (2) Spring cup, rebound   Travel bumper, upper (2) Spring rod bushing (2)
                                                    Acorn nut (2)  Spring bridge          6
              See Figure 2-104. Remove acorn nuts (1), washers (2)  See Figure 2-105. Remove rocker head pivot studs (1), washers (3) and acorn nuts (4) from rockers (2). Unscrew the tool, gradually releasing the tension on the Remove spring fork assembly from rigid fork assembly and rockers. Slide legs out of nylon tie wraps  1.  2.  3.  4.  upper (2)  5.  6.  spring (2)  7.  8.  7  Figure 2-104. Rebound Spring: Disassembly



                and spring bridge (3). Remove upper spring restraints (4). Remove upper (rebound) springs (5). Remove rebound spring cups (6). Remove upper rubber travel bumpers (7).  Remove bushings (8).  lower (compression) springs.  8








          HOME  5.  6.  7.  8.  9.  10.  11.  12.  13.         1  2  3   4         5
   731   732   733   734   735   736   737   738   739   740   741