Page 737 - 2006 HARLEY FLSTCI SERVICE MANUAL

Make sure lower rubber travel bumpers are seated in the
cups are at the bottom of the rigid fork spring brace.
lower springs, lower rubber travel bumpers, and spring
rigid fork, and be sure the spring fork legs are in the
Install thick head pivot stud (1) with thick washer (3) and
See Figure 2-105. Place spring fork lower end in position
Use the compression tool and compress the compres-
Position spring fork assembly in rigid fork assembly so
Install compression spring cup (2) and lower rubber
acorn nut (4). Tighten nut to 45-50 ft-lbs (61.0-67.8 Nm).
s0354x2x
Repeat steps 1 through 8 above for other side.
6
4 7
5
8
6

travel bumpers (1). nylon cable ties. sion (lower) springs. in rocker (2). Hole for screwdriver 1 2 3

8. 9. 10. 11. 12. 13. Figure 2-106. Compression Spring

See Figure 2-106. Place both spring seats (6) on the Place inner/lower compression spring (7) over lower Position spring rods assembly in spring fork bracket. Use a #2 Phillips head screwdriver in the cross-hole at the bottom of the spring rod (5). Tighten long acorn nut to Place inner/upper compression spring (4) on spring Place outside compression spring (3) over the inside

Assembly spring rod (5). spring rod and spring seats. Install long acorn nut (8). 20-25 ft-lbs (27.1-33.9 Nm). seats. compression springs. Travel bumper, lower (2) Spring cup, compression spring (2) Compression spring, outer (2) Compression spring, inner/upper(2) Spring rod assembly (2) Spring seat (4) Compression spring, inner/lower (2) Acorn nut, lower spring rod (2) 2006 Softail: Chassis

HOME 1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 4. 5. 6. 7. 8. 2-88