Page 8 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 8

1.2                                                                                                                                       1-3

                                     3
                                               2


                                                     Figure 1-1. Starter Terminals                                                                      2006 Softail: Starting & Charging







                                        1
                      Motor terminal  Battery terminal  Relay terminal







                      1.  2.  3.                  d0361x5x
              STARTING SYSTEM DIAGNOSIS
                                    1.4 DIAGNOSTICS/ Remove starter motor. Connect jumper wires as described in FREE RUNNING CURRENT DRAW TEST Connect BREAKOUT BOX (Part No. HD-42682) to TSM/ Remove TSSM and use HARNESS CONNECTOR TEST KIT (Part No. HD-41404) to short terminal 9 on connec- tor [30] to ground. If starter motor cranks, replace TSSM. Connect BREAKOUT BOX (Part No. HD-42682) (black) and 6-pin Harness Adapters (Part no. HD-42962) between wiring harness connector [22A] and Right Hand See Starter Current Draw Test under 1.5 STARTER SYS- See FREE RUNNING CURRENT DRAW  TEST under  bold text underneath the
















                      DIAGNOSTICS  Diagnostic Notes The reference numbers below correlate with the circled num- bers on the starter system flow charts.  DROPS under  See VOLTAGE  TROUBLESHOOTING.  under 1.6 TESTING ASSEMBLED STARTER. TSSM. See 3.11 BREAKOUT BOX: TSM/TSSM.  Control harness connector [22B].  TEM TESTING.  1.6 TESTING ASSEMBLED STARTER.  Job/Time Code Values Dealership technicians filing warranty claims should use the job/time code values printed in   appropriate repair.






          HOME                      1.   2.     3.   4.    5.       6.   7.
   3   4   5   6   7   8   9   10   11   12   13