Page 870 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 870

3-83






                                                                                                                                                                 2006 Softail: Engine
                                                         Figure 3-111. Neway Valve Seat Cutter Set



















               d0682x3x




                              VALVE SEAT






                              Obtain the NEWAY                                                        If the 46° cut is too high (towards the combustion chamber), use the 31° cutter to lower the valve seat If the 46° cut is too low, use the 60° cutter to raise




              NOTES Always ensure cutter blades and cutter pilot are clean before beginning the cutting process. The correct clean- ing brush is supplied with the Neway tool set. Always ensure the inside of the valve guide is clean by using Kent-Moore cleaning brush (Part No HD-34751). CUTTER SET (Part no. HD-35758-B). Choose the cutter pilot that fits properly into the valve guide hole. Securely seat the pilot by pushing down and turning using the installation tool supplied in the tool set. Choose the proper 46° cutter (intake or exhaust) and gently slide the cutter onto the pilot. Be careful not to While applying a constant and consistent pressure, remove just en


                              Figure 3-111.   drop the cutter onto the seat.  uniform finish and remove pitting).  closer to the port.






                              See                                   improper installation.         be made next.  a.   b.        valve seat.
          HOME  ●       ●     7.         8.      9.                                         10.                      ●       ●
   865   866   867   868   869   870   871   872   873   874   875