Page 980 - 2006 HARLEY FLSTCI SERVICE MANUAL

If you force coupling Counterbore (shallow side)
5.6 s0211x5x 10 5-15

2 12 2006 Softail: Starter

1 9
Lockplate and thrust washer under destroyed and will have to be replaced. retaining ring (9), if necessary. Keyway 7 6 5
3 Figure 5-25. Primary Chaincase and Jackshaft Assembly CAUTION If you want to replace the coupling (10) and/or retaining ring (9), you will have to remove the starter. See 5.4 STARTER. through the primary case oil seal, the seal will be Remove coupling (10) from the starter shaft. Replace 8 11

Jackshaft bolt Pinion gear REMOVAL 4
1. 2. 3. 8.

3 Figure 5-26. Starter Jackshaft
PRIMARY CHAINCASE 6.3 DRIVE COMPO- Hold pinion gear (3) in place and 1
2

STARTER JACKSHAFT

REMOVAL/DISASSEMBLY 1WARNING 1WARNING prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a) Disconnect negative battery cable. Remove primary cover. See COVER under 6.2 PRIMARY CHAINCASE. NOTE See Figure 5-26. If you are only going to service the items from the bolt through the spring (1-5), it is not necessary to Remove clutch assembly. See Figure 5-25. remove the jackshaft bolt (2), lockplate and thrust washer Remove jackshaft from inner primary as an assembly. See Figure 5-26. Remove pinion gear (4) from jackshaft. Remove coupling (7) and

HOME To 1. 2. remove clutch. 3. NENTS. See 4. (1). 5. 6. 7. essary. 1. Lockplate 2. 3. 4. Spring 5. 6. Coupling 7. Jackshaft 8. 9. Coupling 10. 11. 12. d0115x5x