Page 169 - EOSedge installation Documents

EOS 90639-A-PHY-0024 C-arm assembly

f. Transport the frontal c-arm and sit it on the floor close to the column
g. Locate the guiding pins to help align the c-arm on the support bracket
h. Insert two guide pins halfway onto the frontal column bracket starting from the front of the
bracket to the back as you stand in front of the column. The pins locations on the bracket are

top left, bottom right.

i. Prepare the necessary hardware (bolts

and tools) and place them within reach
before attempting to attach the arm
j. Proceed to attach the arm by aligning
and matching the pins to the existing
holes on the c- arm

k. Once properly aligned, bolt the arm in
place using six bolts and then drive the
guide pins all the way in.
l. Torqued the bolts accordingly