Page 170 - EOSedge installation Documents

EOS 90639-A-PHY-0024 C-arm assembly

NOTE: Notice that the bolts for the Frontal c-arm are screwed through the
front side of the arm while the bolts for the Lateral c-arm go through the back
of the arm through access holes built onto the arm.

3. Lateral arm mounting

a. Identify the lateral c-arm – The lateral c-arm is the one with no angle bracket at the end as
compared to the frontal one.

b. Prior to moving the arm, make sure to set the position of the column c-arm support bracket at
a convenient height. The support bracket requires to be securely locked into position while you
attach the c-arm.
c. If the frontal c-arm has already been done, base the new height of the column c-arm support
bracket on the position of the frontal c-arm so they do not interfere with each other.
d. Keep in mind the lateral c-arm always rides on top of the fontal one.