Page 42 - B8773-AEW-XX-XX-PP-A-0001_[P4]_Contractors Manual

2.7 Counters
D R A F T

Counters will be supplied as a joinery item for The contractor MUST consult the franchisee prior
installation by the Principal Contractor. Typical to placing an order for a particular counter
counter details and construction drawings are option. Contractor is to install the appropriate
available from Paradigm, Domino’s approved counter, slap table front/sneeze screen as
counter supplier. shown indicated on the approved drawing.

There are two distinct versions of the counter The slap table front must be positioned to ensure
design, commonly referred to as the ‘lowered’ the ceramic tiles on the face of the counter are
option with a low level collect area, and the 6mm BEHIND the base of the routed line on the
‘security’ option with a continuous glass shelf. slap table front (when fitted). The applied 6mm
thick black line running across the face should
Within England and Wales, the ‘security be read as one line together with the routed
counter’ can be installed either with or without line on the slap table front, with no steps in it.
a two-way drawer, depending on the store
layout: in stores where there is a door between Standard drawings of the counter options can
the Bake & Serve area and the customer area, be found in here including the appropriate
the ‘security counter’ can be used without Sneeze Screen counter front (These directly
a two-way drawer, as the door adjacent to relate to the joinery manufacturers order form).
the counter will allow staff to meet and greet
customers in wheelchairs. In stores where there
is no door directly linking these two areas, the
counter MUST include either a lowered section,
or a two-way drawer.
Note: sites in Scotland, Northern Ireland and Eire will require
a lowered section counter or a security counter with a
drawer.

The glass shelf on the ‘security’ version is 320mm
wide and will require a cross section bar to
provide support. It is imperative that this part of
the post support system is installed. Failure to do
so could result in the glass breaking along the
length. These cross supports are supplied by the
joinery suppliers as part of the installation pieces.

2.7 Counters 3 February 2016