Page 17 - Demo

Adjust: Manual Adjust: The operator can manually enter the value or fine tune the existing value. When the sensor distance method is set to %u201cCalibrate over distance%u201d a run of 400 ft. needs to be made to calibrate the distance. During the 400 ft. run, the speed sensor will put out a series of pulses. This number is a count of pulses that were made during the 400 ft. run. This number is used to calculate many things, such as speed, distance, area, etc. The Adjust feature allows the count to be adjusted for more accuracy. The default value is 15544.Page 17StartStop400 FeetTo manually adjust your speed constant, press the Adjust feature and a box will appear just around the numbers rotate the dial clockwise or counter clockwise to the desire number and then press enter. To manually adjust the speed that your monitor is displaying, go to the main screen to the feature Speed + or Speed %u2013 and adjust your speed to what you know it is. See page 8 and 9 for more details. This function will change your speed constant number corresponds to your speed adjustment.