Page 994 - CRESTRON HOME OS-3

Setup

Setup is different based on the model of the system.
VISTA-15P, VISTA-15PSIA, VISTA-20P, VISTA-20PSIA, VISTA-21iP, VISTA-21iPSIA

NOTE: Do not include leading zeros (0) when entering values.

1. Enter [Installer Code]+800 to enter Programming mode. For example, if the Installer Code
is 1234, enter 1234+800.
2. Press #91 to view the settings in the Options Selection menu. The Options Selection menu
displays [Options] and [Call-Waiting] values. Write down the Options value that is
displayed. This number will be entered in the following step.
3. Press *91 to change the Options Selection settings. Enter [Options]+[Call-Waiting] to
assign the option and call waiting values.
l Options: Enter the Options value that was written down in the previous step.
l Call Waiting: To enable call waiting, enter 2. To disable call waiting, enter 3.

NOTE: The call waiting selection will only have an effect on systems with an SIA in
the model number, but it must still be entered on all systems.

4. Press #190 to view the settings in the Keypad 2 Device Address 17 menu. The Keypad 2
Device Address menu displays the [Partition-Number] and [Sound] values. Write down the
Partition Number value that is displayed. This number will be entered in the following step.
5. Press *190 to change the Keypad 2 Device Address 17 settings. Enter 5+[Sound] to set the
Partition Number to Partition 1 for Remote Services Sound to the value written down in
the previous step.
6. Press #189 to view the settings in the Touch Screen Device (AUI) Enable menu. The Touch
Screen Device (AUI) Enable menu displays [AUI 1], [AUI 2], [AUI 3], and [AUI 4] values. Write
down the AUI 2, AUI 3, and AUI 4 values that are displayed. These numbers will be entered
in the following step.
7. Press *189 to change the Touch Screen Device (AUI) Enable settings. Enter 5+[AUI 2] + [AUI
3] + [AUI 4] to set AUI 1 to 5 and to set AUI2, AUI 3, and AUI 4 to the values that were
written down in the previous step.

8. Press *99 to exit programming mode. After the system resets, it should be ready for use
with the Crestron Home system.

VISTA-128BPT, VISTA-128BPTSIA, VISTA-32FBPT, VISTA-128FBPT, VISTA-
250FBPT, FA1660CT, VISTA-250BPT

1. Enter [Installer Code]+800 to enter Programming mode. For example, if the Installer Code
is 1234, enter 1234+800.
2. Press #+93 to enter Menu Mode and then press 0 until DEVICE PROG? is displayed on the
screen.

3. Press 1 to enter Device Programming mode and display the DEVICE ADDRESS screen.

Product Manual — Doc. 8525Z Crestron Home™ OS • 977