Page 996 - CRESTRON HOME OS-3

Configuring Multiple Keypads

For systems with multiple keypads, do not assign keypad address 17 to any keypad. TheCrestron
Home system uses address 17 to communicate with the Honeywell system.

NOTES:
l The Crestron Home system communicates with the security system over address 1 and 17
for commercial installations and 5 and 6 for residential installations. Do not assign a
keypad to address 1 and 17 for commercial installations and 5 and 6 for residential
installations.

l Keypad address 16 is factory enabled and cannot be disabled. Reserve this address for
physical keypads.

Check Keypad Addresses
To view the keypad address and verify that a keypad address is enabled:
1. Enter [Installer Code]+800 to enter Programming mode. For example, if the Installer Code
is 1234, enter 1234+800.
2. Enter the #+[Keypad-Address-Code] for the Keypad Address that you want to check:

Keypad Address Code Keypad Address
190 17
191 18
192 19

193 20
194 21

195 22
196 23

3. They keypad displays the [Partition-Number] and [Sound] values. If the partition number is
01 or higher, the keypad address is enabled. If the partition number is 00, the keypad
address is disabled.

Change a Keypad Address

1. Enter [Installer Code]+800 to enter Programming mode. For example, if the installer code
is 1234, enter 1234+800.

Product Manual — Doc. 8525Z Crestron Home™ OS • 979