Page 687 - Med Plaza and Cancer Center

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03

Configuring and Browsing the Master Alarm by Using the Web Pages
Chapter 1: Introduction

4. If you know the SMTP Server Address, click in the SMTP Server
Address window.

NOTE:
Using the SMTP server address is preferred over using the SMTP server
name.

5. Type in the address of the SMTP server in that window.

6. If you know the SMTP Server Name, click in the SMTP Server Name
window.

7. Type in the name of the SMTP server in that window.

NOTE:
You need only the address or name, but not both.

8. Click in the Electronic Address 1 window.

9. Type in the electronic address of the first person that needs to be notified
when an alarm occurs.

10. Repeat step 8 and step 9 until you have all the addresses that you need.

11. When you are finished setting up the electronic notification, click on the
Submit button. The Electronic Notification Changes Accepted window
displays (see figure 1-40 on page 1-91).

When you receive electronic mail from the MedPlus TotalAlert™ Alarm
Network, it has the user in the Email Address 1 position in the received
message’s “From” window.

In our example, the message would appear to come from
joe_service@hospital.com. If you respond to electronic mail sent from the
alarm, the response is directed to the user in the Email Address 1 position.

Page 1 - 90 MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra)