Page 940 - Med Plaza and Cancer Center

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03

6.2 Setting up the Internet Interface
Chapter 6: General Procedures

Master Alarm Module or Network Communications Board
Connection

1
1. Open a web browser, such as E-Microsoft Internet Explorer® 4 or
2
Netscape Navigator® 4.
2. Check to learn if your browser uses a proxy server or not. If not, skip to
step 4. If so, go to step 3.

3. If your Web browser uses a proxy server, it will attempt to find the network
device on the Internet; so you will need to add an exception.

a. To add an exception, do the following:

• While your browser is running, go to the Tools drop down menu.
• Click on the Internet Options choice.
• Click on the Connections tab.

• Click on the Lan Settings button.

• Click on the Advanced button.
• Enter 192.168.*.*, beside the HTTP: Type in the “Proxy address to
use” window.
• Go to step 5.

4. If your Web browser does not use a proxy server, enter http://192.168.1.1/
in the address window (A); then press Enter (see figure 6-2 on page 6-8).

NOTE:
This is the Controller Serial Port Address, and NEVER changes.

The Home page of the controller displays.

5. To close the session, do the following:
a. Right click on the two little monitors on the task bar.

b. Select Disconnect.
6

1. E-Microsoft Internet Explorer® is a registered trademark of Microsoft Corporation.
2. Netscape Navigator® is a registered trademark of Netscape Communications Corp.

MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra) Page 6 - 23