Page 321 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Small Block V8 Hydraulic Roller Camshafts Roller Timing Chain Sets
Full roller timing chain sets provide maximum performance
and longevity. All crank sprockets have nine different index
Hydraulic roller camshafts are replacements for stock roller tappet cam- positions to aid camshaft degreeing.
shafts in 1985-95 302 engines. Part No. Description
FRDM6268-A302 289-351W Iron Cam Sprocket
Duration @
.050" Lift FRDM6268-B302 289-351W Steel Cam Sprocket
Part No. Application Intake Exh. Intake Exh. FRDM6268-A390 390-428 “FE” (exc. 1961-63 Camshafts)
Excellent Low And Mid-Range Torque, FRDM6268-A460 429-460 Steel Cam Sprocket
FRDM6250-E303 220° 220° .498" .498"
2500-5500 RPM Range FRDM6268-B429 429-460 Iron Cam Sprocket
Good Mid-Range And Top-End,
FRDM6250-F303 226° 226° .512" .512"
2800-6000 RPM Range Camshaft Thrust Plate
Significant Top-End Horsepower,
FRDM6250-B303 224° 224° .480" .480"
3300-6100 RPM Range Part No. Description
Top-End HP, Manual Trans. Recommended, FRDM6269-A302 302-351W Replacement Thrust Plate, Not For Steel Cam Gear
FRDM6250-X303 224° 224° .542" .542"
3500-6200 RPM Range FRDM6269-B302 302-351 Ford Racing Replacement Thrust Plate, For Steel Cam Gear
Note: On EFI engines, the above camshafts work only with mass air induction systems. The above
camshafts also fit 1994-95 351W with factory roller camshaft when used with mass air EFI. Fuel Pump Eccentric
Part No. Description
Hydraulic Roller Lifters FRDM6287-B302 289-351W, 3/8" Bolt
Choose from OEM replacement or
high-performance hydraulic roller Engine Swap Oil Pan Kits
Lifters. High Performance units are Required when swapping a 302, 351W,or
proven to add 200-300 RPM increase 460 into a 1979-95 Mustang. Each kit
in RPM range. Sold in sets of 16. includes rear sump oil pan, dipstick and
Part No. Description tube, pickup, and main cap stud. Oil pan
FRDM6500-R302 5.0L EFI Hydraulic Roller Lifters, Set Of 16 fasteners not included. FRDM6675-A460
FRDM6500-R302H High-Performance Hydraulic Roller Lifters, Set Of 16
Part No. Description
FRDM6675-A50 302/5.0L Oil Pan Kit, Fits 1983-01 Production 302 Blocks
302-351W Roller Camshaft Conversion Kit 351W/5.8L Oil Pan Kit, Fits 1969-04 Production 351W And Most High
FRDM6675-A58
FRDM6253-A50 Performance Blocks
FRDM6675-A460 429-460 Oil Pan Kit, Fits 1969-97 Production 429, 460 Blocks
Conversion kit for 1985-01 302, 1994-97
351W, and many other Windsor-based Rear Main Seals
1996-04 race short blocks. Includes High-temperature Viton seals listed are all of
eight hydraulic roller lifter tie bars, one one-piece design.
retainer plate, and two bolts.
Part No. Description
FRDM6701-B302 302, 1983-2002 And Ford Racing 302 Blocks
Camshaft Bearings FRDM6701-B351 351W, From 7/11/83-Up And Ford Racing 351W Blocks From 6/1/93-Up
FRDM6261-J351
Oil Pumps
Cam bearings are designed for use in 302/351
Ford Racing blocks including FRDM6010-R302/ Pumps listed require bolt-on pickup (not included).
Description
S302/R351/R352/S351/V351/W351/R451/R452/R453/B302BB/ Part No. Big Block Ford 429/460, Exc. 429 CJ, High Volume,
BOSS302/BOSS35192/BOSS35195/BOSS351BB cast iron blocks. FRDM6600-A460 Fits Rear Sump Truck Pan
FRDM6600-D2 Small Block Ford 289/302, High Volume
FRDM6600-D46 Ford 4.6L 4V, Increases Volume On 4.6L 2V
Roller Camshaft Bearings
FRDM6600-A460
Low-friction roller cam bearings require only oil Oil Pump Drive Shafts
“splash” lubrication so oil delivery holes can Heavy-duty centerless ground chrome moly Ford Racing shafts add a high
be blocked off to reduce oil aeration and windage loss. Block must be degree of reliability.
machined to accept bearings listed. Sold in sets of five. Part No. Description
Part No. Description FRDM6605-A341* 351W/All 351 SVO
FRDM6261-D351 351 Roller Camshaft Bearings FRDM6605-A429 429/460
FRDM6261-A460 429-460 Roller Camshaft Bearings FRDM6605-B302 1987-95 302 5.0L
Note: The 351 cam journals are NOT production dimension, requiring a custom camshaft. *Will not fit EEC-IV engines.
The 429-460 dimensions are production, roller bearings require an SAE 8620 steel (roller)
camshaft.

320