Page 469 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING
2020 DRAG RACING

Oil Preheaters Oil Filter Bypass
Element-type preheaters increase temperature of MOR23770
12 qts. of oil by 60°F in 30 minutes for improved Fits all small block Chevy V8’s. For use
performance. May be installed in engine or with wet sump oil systems when re mote oil filters
transmission pans, dry sump tanks, etc. Element is or coolers are used. Bypass is cast from aluminum with 1/2"NPT inlet and
4-1/2" long and includes 1"NPT fitting and 7' long 110V power cord. outlet. Includes gaskets and fasteners.
Part No. Description
MOR23980 Internal Oil Preheater, Aluminum Fitting Oil Filter Block-Off Plate
MOR23990 Internal Oil Preheater, Steel Fitting
MOR23991 Internal Oil Preheater, Aluminum Fitting, Self-Contained MOR23840
Often used on dry sump oil system installa-
Lifter Valley Oil Baffles tions, plate has a 1/2"NPT port for input pressure line and fits all small and
Baffles keep hot oil off of the bot- big block Chevy (except Gen. V/VI or those with bolt hole at center of pad).
tom of intake manifold for increased
horsepower and keep lifters in their bores Oil Pump Block-Off Plate
if pushrod or rocker arms fail. Minor trimming required MOR23790
for installation. Not compatible with roller lifters. Bolt-on aluminum plate seals oil passage on rear
Part No. Description main cap when dry sump is used. Requires no drilling
MOR25050 SB Chevy, Including 18° Cylinder Heads or tapping for in stal la tion on small/big block and 90° V6 Chevys.
MOR25100 BB Chevy
Accumulator Remote Oil Filter Mounts
Oil is stored under pressure Ideal for dry sump oil systems on installations requir-
for immediate release into ing a remote mounted oil filter. Offered in cast or
the main galleries if oil pressure drops. It can also decrease the oil level in billet aluminum construction, mounts accept popular
the pan to reduce windage. A cold start valve releases oil into a cold engine spin-on type oil filters. Billet mounts include adapters to accept most
to reduce wear. The Accumulator is 20-1/8" long and 4-1/4" diameter, popular filters.
mounts in any position, holds 3-quarts of oil and is tapped for a 1/2"NPT Part No. Description
fitting. Use with mount kit MOR23920, oil filter adapter MOR23690 MOR23700 Cast Filter Mount, Accepts Ford/Chrysler Filter, Right Inlet/Left Outlet
(Chevrolet), and solenoid valve MOR23905. MOR23710 Cast Filter Mount, Accepts Ford/Chrysler Filter, Left Inlet/Right Outlet
Part No. Description MOR23750 Cast Filter Mount, Accepts Chevy Filter, Right Inlet/Left Outlet
MOR23900 Accumulator, 3 Quart Capacity MOR23760 Cast Filter Mount, Accepts Chevy Filter, Left Inlet/Right Outlet
MOR23920 Accumulator Mount Kit MOR23763 Billet Filter Mount, Accepts Most Filters, Side Port Style
MOR23690 Oil Filter Adapter MOR23764 Billet Filter Mount, Accepts Most Filters, Front Port Style
MOR23905 12 Volt Solenoid Valve
MOR23766 Large Billet Filter Mount, Accepts Most Filters, Vertical Ports
Oil Filter Adapters
Racing Vacuum Pumps
Adapters lower filter approximately 1/2" and accept
plumbing for accumulators, external or dry sump pumps, Choose 3- or 4-vane pump for improved ring seal
or remote oil filters. Includes hardware and O-rings. and decreased blow-by. “Original Design”, “Enhanced
Design”, and “Pro Mod” Pumps are billet aluminum
Part No. Description
MOR23690 Chevy V8, For Accumulators And External Or Dry Sump Pumps with integral mounting lugs. The 4-vane pumps are
MOR23692 Chevy V8, For Remote Oil Coolers ideal for dry sumps which require increased crankcase
vacuum. “Pro Mod” pump, for large cubic inch or MOR22640
Billet Oil Filter Bypass Plate blower motors flows up to 150% more air at low RPM and can provide up
MOR23782 to 26" of vacuum. Use MOR64885 A.I.R. pump pulley to maintain correct
Necessary when using a remote oil filter or returning oil pump speed.
from dry sump systems. Fits small and big block Chevys and Merlin big blocks. Part No. Description
Plate accepts 1/2"NPT fittings. Mounting hard ware. O-rings are included. MOR22640 “Original Design” 3-Vane Vacuum Pump
MOR22641 “Original Design” 4-Vane Vacuum Pump
Oil Bypass Eliminator MOR22642 “Enhanced Design” 4-Vane Vacuum Pump
MOR22643 “Pro Mod” Design 4-Vane Vacuum Pump
MOR23775
MOR22644 “Enhanced Design” 4-Vane Vacuum Pump, Natural Finish
Machined billet aluminum adapter eliminates the bypass MOR22840 “Enhanced Design” 3-Vane Vacuum Pump
found in OEM filter adapters, preventing unfiltered oil MOR22842 “Enhanced Design” 4-Vane Vacuum Pump, Mounting Bracket Not Included
from entering the engine. Adapter features a single inlet
and accepts spin-on, stock-type oil filters. Fits all Chevy V8 engines.

468
468