Page 68 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Rear Ends & Axles

Custom Width Ford 9" Housing 9" Non Floater Housing Kit
ALL68710 For GM Intermediate Metric Chassis

Housings for stock or float- ALL68756
ing axles can be built to any width and pinion location. Floating axle hous-
ings are available with Allstar/Howe/Port City, SCP, or AFCO 5x5, or Wide
5 Pins. Stock housings can be ordered with small Ford, big Ford, or new
style big Ford ends. Select used center sections, as well as new Heavy-Duty
or “Hot Rod” style center sections, may be specified. “Hot Rod” center sec-
tion provides clearance for brackets or exhaust systems in street rods and
vehicles with limited space. All housings have select used centers, new axle
tubes installed and are jig-welded for straightness. To order please call and
request a special order form, fill in all of
the required information and return to Scan for the Custom
Width Ford 9"
us with a signature attached. Housings Housing order form. ALL68758
are non-returnable and offered on a
special order basis only.

Rear End Station Brackets Housing kit fits the 1978-88 GM intermediate chassis. Replace a stock
ALL10178 GM 7.5" rear-end with the much stronger Ford 9" style. Kit includes a
Stand adapter brackets select used center section, new axle tubes with large bearing late Ford/
fasten to adjustable arms Torino style-ends, 31-spline axles with bearings and seals installed, drilled
of most engine stands. for studs with 5 on 4-1/2" or 5 on 4-3/4" bolt circles. Choose from two
Supports full-size car and widths, 58" and 60" axle flange to axle flange.
light truck rear axle hous- Part No. Description
ings when servicing or Engine Stand Not Included ALL68758 Ford 9" Housing Kit 58" With GM Mounts
replacing differential gear sets. Position housing onto arms and secure into ALL68756 Ford 9" Housing Kit 58" Without GM Mounts
place with included retaining straps. (Engine stand sold separately). ALL68759 Ford 9" Housing Kit 60" With GM Mounts
ALL68757 Ford 9" Housing Kit 60" Without GM Mounts

Ford 9" Cut To Fit Flanged Axles
Cut to fit 31-spline axles for Ford 9"
Pinion Centering Jig
rear ends are a great alternative
ALL68370
to custom axles for street, drag
Pinion centering jig fastens to the rear end housing and locates racing, and circle track use. Axles
the pinion centerline when building or narrowing housings. are drilled for .687" press-in style
Machined slots are designed to retain most tape measure ends wheel studs and have multiple wheel bolt patterns for 5 on 4.5", 4.75"
for accurate measurements. Applications include GM 12 and and 5" bolt circles. Axles have .470" thick flanges with a 5.94" outer
14-Bolt, Dana 44 and 60, Chrysler 8-3/4", Ford 8.8" and 9" diameter and a 3.06" hub register to center most rotors and drums. Axles
housings. with bearings have a 3.150" O.D. bearing installed for housings with large
bearing ends, a press-on sleeve to retain bearing to the axle, and an axle
retainer for large bearing late/Torino -style housing end. Wheel studs sold
separately.
Ford 9" Truss Support Part No. Description
ALL67500 Axle, 29-1/2" Long (With 10" Of Spline)
ALL68330
ALL67501 Axle With Bearing, 29-1/2" Long (With 10" Of Spline)
Weld-on support adds ALL67502 Axle, 33" Long (With 9" Of Spline)
strength to rear axle ALL67503 Axle With Bearing, 33" Long (With 9" Of Spline)
housing and reduces Related Items
unwanted flex during ex- ALL44111 1/2"-20 Wheel Studs, 5-Pack
treme torque. Constructed of 12-gauge (.108") steel. 36" long x 2" wide. ALL44117 5/8"-18 Wheel Studs, 5-Pack
ALL72315 Replacement Axle Bearing

67