Page 72 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Rear Ends & Axles

Clamp-On Mini Breathers Mini Breather Tanks
Breathers are easily mounted to either 1-1/2" or Small capacity, spun aluminum tanks can be used to vent
1-3/4" tubing. Breathers are 1" tall and 1-3/8" transmission or rear end to prevent lubricant from being
in diameter. Great for use on transmissions, forced out. Tanks are complete with 1/4"NPT bung at bot-
differentials, etc. Bottom fitting is 1/4"NPT. Black tom and bracket for mounting to chassis tubing.
anodized finish. Part No. Description
ALL36140 Tank For 1-1/2" Tubing
Part No. Description
ALL36106 Breather For 1-1/2" Tubing ALL36141 Tank For 1-3/4" Tubing
ALL36107 Breather For 1-3/4" Tubing
ALL36103 Replacement Filter Only Mini Breather
ALL36145
Compact breather mounts in a deck or bracket with a 7/16" hole and has a
-4AN male end making it ideal for venting transmissions or rear ends.

Safety/Driver Equipment

Roll Bar Padding Door Bar Padding
Closed-cell foam does not ALL14115
absorb moisture, and Closed cell padding adds protec-
progressively absorbs shock tion from hard surfaces inside a
(gets more dense as it is race car. Cover door bars, seat
compressed). Offset inside supports, or increase padding in
diameter allows easy installa- seat for comfort. Sold in 36" x 48" sheets, 3/4" thick.
tion, with thicker padding toward driver. Available in 3-foot lengths.
24"
Part No. Description Drag Window Net
ALL14100 Black ALL10289
ALL14101 Red Drag window net with border style
ALL14102 Blue mounting attaches to the diagonal door 24" 18"
ALL14103 Orange bar of most drag cars. Net meets SFI
ALL14104 Yellow 27.1 specification and is appropriately
ALL14105 Gray
ALL14106 Purple tagged. Net has top and bottom built-in
sleeves to accept most round tube-style
SFI Mini Roll Bar Padding window net installation kits including ALL10217 and ALL10219.
ALL14112
Mini roll bar padding is ideal Funny Car Style Window Net
for tight areas in a race car ALL10291
when standard padding is too Border-style window net has built-in vertical sleeves for
large. Unique, compact design installing mounting rods to attach net to the chassis. Net
provides driver protection to a specific area. Peel and stick backing for easy is ideal for cages that have been fitted with or updated
installation on 1-1/4" to 1-3/4" tubing. Meets SFI 45.1 specifications. Sold to funny car-style bars around the driver. Net is SFI 27.1
in 3-foot lengths, black only. certified.

SFI Roll Bar Padding
Provides 180° coverage where
space concerns are not a
problem. Peel and stick back-
ing for easy installation. Meets
SFI 45.1 specifications. Choose
from two sizes, each 3 feet long, black only.
Part No. Description
ALL14110 1-1/8" To 1-1/2" O.D. Tubing
ALL14111 1-5/8" To 2" O.D. Tubing

Photo By JohnnyB Imagery Bob Cripe

71