Page 70 - 2020-2021 Racecar Engineering Drag Racing Parts and Accessories Catalog

2020 DRAG RACING

Rear Ends & Axles

Ring And Pinion Installation Kits
Allstar ring and pinion installation kits are available with or without bearings. Kits contain all the hard-to-find individual parts for a quick, trouble-free installation.
Bearing Kits Include:* Shim Kits Include:*
• Pinion And Side (Carrier) Bearings • Pinion Seal
• Pinion Seal • Pinion Depth Shims
• Pinion Depth Shims • Adjustable Side (Carrier) Shims,
• Adjustable Side (Carrier) Shims Two (If Applicable)
• Crush Sleeve Or Solid Spacer • Crush Sleeve Or Solid Spacer
• Pinion Nut • Pinion Nut
• One Ounce Tube Of Silicone Or Gasket • One Ounce Tube Of Silicone Or Gasket
• Gear Marking Compound • Gear Marking Compound
• Ring Gear Bolts • Ring Gear Bolts
*Kit components shown for reference only, specific components will vary depending on application.
Bearing Kit Shim Kit Carrier Type Application
General Motors
ALL68515 ALL68615 10-Bolt 7.5", Passenger And Light Truck S-10 1982-1998
— ALL68616 10-Bolt 7.5", Passenger, Except Monza 1977-1981
— ALL68622 10-Bolt 8.2", Chevy Passenger And G-10 Van, 30-Spline Pinion
ALL68521 ALL68621 10-Bolt 8.5", 30-Spline Pinion Passenger And Light Truck
ALL68518 ALL68618 12-Bolt 8.875", Chevy And GMC Truck And Blazer, 1.438" Pinion
ALL68519 ALL68619 12-Bolt 8.875", Chevy Hi-Performance Passenger Axle, 1.625" Pinion
Chrysler
ALL68532 ALL68631 8-3/4" 489 Casting With 2.000" I.D. Carrier Bearings (Large #9 On Side Of Casting)
ALL68531 ALL68631 8-3/4" 489 Casting With 1.796" I.D. Carrier Bearings (Large #9 On Side Of Casting)
ALL68537 ALL68637 8-3/4" 742 Casting With 1.796" I.D. Carrier Bearings (Large #2 On Side Of Casting)
Ford Motor Company
— ALL68639 8" “Pig” Type, 25-Spline Pinion
ALL68513 ALL68613 8.8" Salisbury Type With 10-Bolt Cover, 30-Spline Pinion
ALL68510 ALL68610 9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68511 ALL68611 9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68509 ALL68610 9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68512 ALL68611 9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68539 ALL68610 9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68538 ALL68611 9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68543 ALL68610 9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68542 ALL68611 9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68540 — 9" 3.250" Carrier Bearing, MW or Strange 28-Spline Pinion Support, No Spacer Or Crush Sleeve
ALL68541 — 9" 3.250" Carrier Bearing, MW or Strange 35-Spline Pinion Support, No Spacer Or Crush Sleeve
Dana
ALL68533 ALL68633 — Model 44 / 1967-1997
ALL68534 ALL68634 — Model 60 And 61 / 1966-1998
Ring And Pinion Gear Sets Ford 9"
Quality differential components are suitable for race, street, and off-road Sets fit 10-bolt with 9" ring gear, 1.313" dia. pinion stem and 28-spline pinion.
use. Lapped in matched sets for quiet operation. Part No. Ratio Part No. Ratio
ALL70010 3.50 ALL70028 5.14
ALL70012 3.70 ALL70030 5.29
GM 7.5" ALL70014 3.89 ALL70032 5.43
Sets fit 10-bolt with 7.5" ring gear, 1.438" dia. pinion ALL70016 4.11 ALL70034 5.67
ALL70018
stem and 27-spline pinion. ALL70020 4.30 ALL70036 5.83
ALL70038
4.56
6.00
Part No. Ratio Part No. Ratio ALL70022 4.71 ALL70040 6.20
ALL70110* 3.23 ALL70115 † 3.73 ALL70024 4.86 ALL70042 6.33
ALL70112* 3.42 ALL70116* 4.10 ALL70026 5.00 ALL70044 6.50
ALL70113 † 3.42 ALL70117 † 4.10
ALL70114* 3.73 ALL70118* 4.56 GM 7.5" Ring Gear Spacer
*Set includes standard width ring gear for use with 3.23 and numerically higher ratio carriers ALL70100
or when using 3.08 and numerically lower ratio carriers and ALL70100 spacer.
†Set includes thick ring gear for use with 3.08 and numerically lower ratio carriers. Spacer allows installation of 3.23 and numerically
higher ratio gear sets with standard thickness ring
GM 8.5" gears into 3.08 and numerically lower carriers.
Sets fit 10-bolt with 8.5" ring gear, 1.625" dia. pinion stem and 30-spline pinion. Steel spacer is .3125" thick and includes ten
Part No. Ratio Part No. Ratio 7/16"-20 x 1-1/4" UHL LH bolts.
ALL70120 3.08 ALL70126 4.10
ALL70122 3.42 ALL70128 4.56
ALL70124 3.73

69