Page 231 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Performance Camshafts For Ford Supercharged 4.6/5.4L
Level 2 camshafts offer increased horsepower and an extended RPM range. Camshafts work well with stock or near-
stock engines and drivetrains, and offer superior low end and mid-range power. Ideal when accompanied by small diameter
tube headers, low restriction dual exhaust, aftermarket manifold, performance ignition and 9.5:1+ compression ratio.
Power Adv. Duration Intake Exhaust
Part No. Application Type Range Duration @ .050" Lift Lift
CRO62802-2 Ford 4.6/5.4L 2V, 1999-Up Hyd. 1500-6500 276°/276° 234°/234° .581" .581"
CRO62822-4 Ford 4.6/5.4L 4V, 1993-Up Hyd. Idle-5900 264°/264° 222°/222° .475" .475"
CRO62824-4 Ford 4.6/5.4L 4V, 1993-Up Hyd. Idle-7750+ 270°/270° 236°/244° .484” .484”

Full Body Roller Lifters Hydraulic And Solid Lifters
Bearings and outer races are crowned to Quality hydraulic and solid lifters are available for Chevy
eliminate lobe tracking. “HIPPO” (Hi-Pressure Pin V8. All lifters have a precisely ground and finished
Oiler) lifters have a .024" orifice to direct oil to the crown face for quick camshaft/lifter break-in
needle bearings, improving durability. Not avail- and a long life. Sold in sets of 16.
able in offset designs. Sets of 16. Application Hydraulic Solid
Part No. Description Chevy V8 CRO66000-16 CRO66900-16
CRO66200-16 SB Chevy 262-400, .842" Dia.
CRO66200H-16 SB Chevy 262-400, .842", “HIPPO” “Coolface” Solid Lifters
CRO66201-16 BB Chevy 396-454, .842" Dia. CRO66900X980-16
CRO66201H-16 BB Chevy 396-454, .842" Dia., “HIPPO” Chevy V8, .842" dia. lifters have a .024" oil
metering port machined into the face of the
Severe Duty Roller Lifters lifter to improve durability with no significant oil
Ideal for high RPM and high cylinder pressure, pressure loss. Ideal for high RPM engines with high rocker arm
lightweight lifters have billet alloy bodies, ratios and valve spring pressures. Sold in set of 16.
and heavy duty blades which are raised Note: Block restrictors are not recommended with “Coolface” solid lifters.
for use with late model blocks. “HIPPO”
(Hi-Pressure Pin Oiler) lifters have a .024" Stainless Steel
orifice to direct oil to the needle bearings, improving durability. Rollerized Rocker Arms
Choose standard or offset designs. Sets of 16.
Rocker Arms are made of 17-4PH stainless steel,
Standard “HIPPO"
Description Part No. Part No. heat treated and fitted with oversized needle
SB Chevy 262-400, .842" Dia. CRO66290-16 CRO66290H-16 bearings, sure-lock rocker nuts and ball race
SB Chevy 262-400, CRO66292-16 CRO66292H-16 steel tip rollers. Lightweight, narrow body rock-
.842" Dia., Offset Int. ers provide plenty of clearance when used with
SB Chevy 262-400, large diameter valve springs or high lift camshafts. Sold in sets
.874" Dia., Offset Int. CRO66292X874-16 CRO66292X874H-16 of 16.
SB Chevy 262-400,
.903" Dia., Offset Int. — CRO66292X903H-16* Part No. Description Ratio Stud
BB Chevy 396-454, .842" Dia. CRO66291-16 CRO66291H-16 CRO73601-16 SB Chevy 265-400 1.5 7/16"
BB Chevy 396-454, † CRO73641-16 SB Chevy 265-400 1.6 7/16"
.842" Dia., Endura Max CRO66291X842E-16 — CRO73605-16 BB Chevy 396-454 1.7 7/16"
BB Chevy 396-454, CRO66293-16 CRO66293H-16
.842" Dia., Offset Int. Jumbo Split Lock 10° Valve Stem
BB Chevy 396-454, .903" Dia. CRO66291X903-16* CRO66291X903H-16* Keepers
BB Chevy 396-454, CRO66293X903-16* CRO66293X903H-16*
.903" Dia., Offset Int. Keepers provide twice the strength of con-
SB Ford 221-351W CRO66215-16 CRO66215H-16 ventional 7° tapers. Machined from premium
BB Ford 429-460 CRO66217-16 CRO66217H-16 chrome moly steel, heat treated for maximum strength, and
* Severe Duty/Oversized Bearing lifters. Lifters have a .812" bearing O.D. offered in standard, .050" higher or .050" lower installed heights.
rather than standard .750". Keepers fit 11/32" valve stems, sold in sets of 16 pair.
† Endrua max lifters have needleless roller bushing for greater load
handling ability. Part No. Description
CRO86110-16 Standard Installed Height
Hi-Seat Offset Roller Lifters CRO86110X1-16 +.050" Installed Height
-.050" Installed Height
CRO86110X2-16
Roller Lifters incorporate a .180" offset,
integral rev-kit button and Crower’s “Hi-Seat” Billet Performance
pushrod design, which allows for shorter push-
rods, reducing flex for improved valve control. 7° Valve Stem Keepers
“HIPPO” (Hi-Pressure Pin Oiler) lifters have a Machined from chrome moly and heat treated for
.024" orifice to direct oil to the needle bearings, maximum strength. Keepers fit 11/32" valve stems.
improving durability. Sold in sets of 16. Sold in sets of 16 pair.
Part No. Description Part No. Description
CRO66275-16 SB Chevy 265-400, .842" CRO86107X1-16 +.050" Installed Height
CRO86107X2-16 -.050" Installed Height
CRO66275H-16 SB Chevy 265-400, .842", “HIPPO”
229