Page 25 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

COOLING

1955-57 Chevy Aluminum Radiator ALL30006 Upper Mount Kit
A direct replacement radiator for all For Plastic Tank Radiators ALL30152
1955-57 Chevy passenger cars Channel rests on top of the core and two flat aluminum
with a V8 engine using a short straps may be bolted or welded to the channel.
style water pump. Radiator has Hook the steel springs into provided hole
mounting brackets that position it and connect to a lower chassis
behind the core support bar, two location. Kit includes channel
rows of 1" tubes, furnace brazed (1.5" x 21.5"), two straps
tanks, a machined billet filler (1" x 11.5") and two 17"
neck with overflow fitting, drain springs.
petcock, 1/2"NPT bung for ad- Replacement Parts
ditional temperature sender/switch Part No. Description
and mounting clips. The built-in ALL30122 Spring
automatic transmission cooler has ALL30153 Channel
1/4"NPT fittings. 23"H x 24-1/2"W. Core width
is 22". Radiator Tie Down Rods
Aluminum tie down rods are often used with an
Universal Radiator upper radiator support to keep radiator in
Mount Kits place. Rods have 3/8"-24 RH and LH
Kits mount universal threads. Often used with a rod
style radiators to end on one or both ends.
factory radiator core Part No. Description
supports. Aluminum ALL54115 20"
side supports fasten ALL54116 24"
around tanks to ALL54117 30"
cradle radiator and
brackets can be Universal Mounting Kit ALL30085
drilled for a variety Mounting kits are commonly used to mount
of mounting options. Side electric fans, oil coolers, transmission cool-
supports require notching ers or honeycomb screen directly to a
to clear GM and Ford radiator. Kits include four 8" nylon
lower outlet fitting. Kits mounting bolts with washers,
are available for radiators with tapered bottom tanks or square rubber spacer blocks and retain-
bottom tanks. ing nuts. Bolts are pressed through
Part No. Description the fins of the radiator to mount accessory.
ALL30155 Kit For Allstar aluminum tank, Most Griffin And Other Radiators With
Tapered Bottom Tanks
ALL30156 Kit For Allstar plastic tank, AFCO, Howe, Northern And Other Radiators With
Square Bottom Tanks
Blower Fan ALL30002
Upper Radiator Support Bracket ALL30120 Compact, plastic blower moves up to
Universal upper support bracket is pre- 300 CFM of air. The quiet electric blower
formed to fit over the top of most radiator has three speeds and can be adjusted to
cores (up to 2-1/2" thick) to keep radiator move cooling air wherever it’s needed, up to 30 ft.
secured in saddle style lower mounts. Steel away. Weighs just 8 lbs. with two built-in recepta-
bracket is .085" thick and has a 3/16" hole cles and a 12' long power cord. Optional heater
for riveting or bolting in place. accessory (sold separately) attaches to front of
blower and plugs into one of the receptacles to
Upper Mount Kit transform blower into a heater.
For Aluminum Tank Radiators ALL30121 Blower Fan Heater Accessory
Part No. Description
Channel rests on top of the core and two flat
aluminum straps may be bolted or ALL30003 5300 BTU, 115V AC 1400 Watts, Heater With Blower Unit Draws 11.7
Amps, Use With ALL30002 Only, Weight 3 Lbs.
welded to the channel.
Hook the steel springs
into provided hole and Overflow Tank ALL36112
connect to a lower chas- One quart capacity aluminum tank is
sis location. Kit includes channel (2" x 21.5"), mandated by most sanctioning bodies
two straps (1" x 11.5") and two 17" springs. Fit to prevent coolant from spilling on the
Allstar aluminum tank radiators. racing surface. Tank includes (1) 3/8” NPT
Replacement Parts bung on side and (1) 1/2” NPT bung on
Part No. Description bottom with fitting and petcock.
ALL30122 Spring
ALL30123 Channel

23