Page 20 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

CHASSIS

Weld-On Shock Brackets 1/2" Rod End Mount ALL60073
Weld-on shock brackets mount standard and coil-over shocks 3/16" thick steel mount with 1/2" holes accepts rod
with 1/2" I.D. inner bushing or 1/2" rod end to chassis as well as ends up to 5/8" wide. Mount is 1-5/8" tall overall.
many other uses. 1/8" thick mild steel brackets include 1/2" bolt,
spacer and locknut. Quick Release
Notched Tube Mount T-Handle Pins
Bracket is notched for 1-1/2" - 1-3/4" round tubing to create Positive lock quick
a gusset style mount that welds on three sides. Notched design release pins hold tightly ALL60314
positions the bracket perpendicular to the tubing at a 90 degree in place until the handle
angle for straight mount and approximately a 75 degree angle for button is depressed allow-
angled mounts.
ing the pin to be inserted
or removed into or out of a hole with
Straight Mount
ease. Handles are made from 380 die
cast aluminum, shanks are made from Lengths stated are
from base of T-handle
ALL60104 4130 steel. Each pin is equipped with to top of detent ball.
ALL60112
a stainless steel split ring allowing the
option to attach a cable assembly.
Part No. Description Part No. Description
ALL60300 1/4" x 1" ALL60314 3/8" x 3"
ALL60301 1/4" x 1-1/2" ALL60318 1/2" x 2"
ALL60103
ALL60302 1/4" x 2" ALL60320 1/2" x 2-1/2"
Part No. Description ALL60113 ALL60304 5/16" x 1" ALL60322 1/2" x 3"
ALL60103 Short Single ALL60306 5/16" x 2" ALL60324 1/2" x 3-1/2" NEW!
ALL60104 Long Single ALL60308 5/16" x 3" ALL60326 5/8" x 2"
ALL60112 Long Two Position ALL60310 3/8" x 1" ALL60328 5/8" x 2-1/2"
ALL60113 Extra Long Three Position
ALL60312 3/8" x 2" ALL60330 5/8" x 3"
Angle Mount
Quick Pin Lock Collars
Steel lock collar provides a positive lock for
quick release pins. Black coated collar with
button head machine screw allows attach- ALL60335
ment of a securing device, like an Allstar
ALL60100 ALL60101 lanyard (ALL18461 or ALL18463).
Part No. Description Part No. Description
ALL60100 Left Hand Single ALL60335 1/2" Collar With 10-32 Screw
ALL60101 Right Hand Single ALL60336 5/8" Collar With 1/4"-28 Screw
Round Tube Mount
Bracket welds parallel onto Upper Control Arm Brackets
tubing. Typically mounted above ALL60025
or below tubing and includes 1/2" Stamped, 3/16" thick mild steel brackets
shock mounting hardware. Mount- ALL60107 ALL60114 weld to chassis to provide a mounting
ing positions are on 1" centers. point for upper control arm. Brackets are
Part No. Description sold in pairs and have two 5/8" mounting
ALL60107 Single holes, spaced 7/8" apart for adjustment.
ALL60114 Two Position NEW! May be trimmed to desired height.
ALL60115 Three Position
Flat Mount Upper Control Arm Bracket
Bracket mounts to a fl at surface or ALL60115
square tubing. ALL60190
Part No. Description Bracket is fl ame cut from 1/2" thick
ALL60106 Single steel, with a 6" bolt spacing. Welds to
frame and accepts upper A-arm.
Related Parts
ALL60106
Part No. Description
ALL99100 Replacement bolt, locknut, and bushing Chassis Tie Down Brackets
ALL99101 Replacement bushing only ALL60075
Steel brackets weld to chassis
Universal Upper Coil-Over Shock Mount Kit and provide a secure mounting
ALL60230 location to hook a tie down strap or
Weld-in kit provides a mounting point for winch cable. Set of two brackets.
rear coil-over shock mounts in tube, boxed
or stock frames with up to 48” between
frame rails. Great for drag racing or street
applications, kit includes a 48” long, .120”
wall x 1-1/2” mild steel tube, reinforced
mounting tabs, 2” x 3” plates and 1/2” hardware.
18