Page 15 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

CHASSIS

8-Point Roll Bar Kits Lower Seat Mounts
Kits increase safety and the Mounts attach through floor pan to a bar or
structural integrity of the plate on left frame rail or roll cage for
vehicle. Main hoops are seat and anti-sub belt mounting.
custom bent to fit each Layback mount is raised; upright
application precisely. bracket has a low profile.
Hoop and bars con- Part No. Description
structed of .134" mild ALL60070 Layback Seat Bracket
steel, 1-3/4" diameter ALL60071 Upright Seat Bracket
tubing. Welding required.
Floor plates sold sepa- Kit Shown Assembled Seat Mount Brackets
rately for unibody cars. Made from 1/8" thick mild steel. Upper
bracket is angled to fit against the back of
Part No. Description ALL60032
ALL22600 Camaro/Firebird 1967-69 most aluminum racing seats, two-piece design
ALL22601 Camaro/Firebird 1970-81 allows front-to-back and side-to-side adjust-
ALL22604 Camaro 2010-15 ment. Upper mount brackets may be bolted or
ALL22608 G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88 welded. Lower mount welds to 1-1/2" or 1-3/4"
ALL22610 Mustang/Capri 1979-93 tubing. ALL60033
Part No. Description
ALL60032 Upper, 2-Piece
10-Point Roll Cage Kits ALL60033 Lower
Kits increase safety and
the structural integrity of the Double Shear Seat Belt Tab ALL60031
vehicle. Main hoops are custom Bracket welds to chassis and for solid seat belt mount
bent to fit each application to the chassis, yet still pivot. Double shear design
precisely. Hoop and bars con- provides twice the strength of a single tab style mount.
structed of .134" mild steel, Steel bracket accepts 1/2" hardware.
1-5/8" diameter tubing.
Welding required. Floor Kit Shown Assembled Fuel Cell Mounting Bracket ALL60063
plates sold separately Steel bracket is radiused to fit 1-1/2" tubing and has
for unibody cars. (8) 3/8" holes on 1/2" centers. Bracket is .085" thick and
Part No. Description 1-1/2" wide x 4-3/4" tall.
ALL22620 Camaro/Firebird 1967-69
ALL22621 Camaro/Firebird 1970-81 Fuel Cell Mounting Brackets
ALL22628 G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88
ALL22630 Mustang/Capri 1979-93 Steel brackets are .125" thick, 1-3/4" wide and
available in three lengths. All have 3/8" holes.
Part No. Description
ALL60060 2" Long
Floor Plates ALL22640 ALL60061 3" Long
Bolt or weld these steel ALL60062 4-3/4" Long
plates to the floor pan as
required by most sanction-
ing bodies when installing
roll bars into unibody cars.
Increase the structural integrity and
provide a solid mounting point for the roll
bar. 6" x 6" plates are 1/8" (.125") thick and may also be used for
a variety of other uses including fabricating brackets or mounts.
Package of 6.

Strut Bars
ALL22642
Strut bars increase
the rigidity and
strength of a chassis
eliminating flexing and
increasing reaction
times. Bars can be
installed to upgrade existing ten point cage kits or when building
a new chassis. Pre-bent to fit a variety of applications, bars are
65" long overall with a 14" leg and constructed from 1-5/8" x
.134" wall mild steel tubing.

WASP SPEED SHOP
13