Page 11 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

BRAKE

Metric Brake Rotors Mustang II Brake Rotor
New stock replacement brake rotor includes Convert stock Mustang II brake assemblies
new bearing races and studs for most inter- with 9-1/4" diameter rotors to 5-lug rotors and
mediate sized Metric chassis cars including retain the stock brakes. Rotors include 1/2"-
Monte Carlo, Grand Prix, and Regal. Rotors 20 wheel studs and utilize the stock bearings
measure 10.5" O.D. x 1.03" thick. Bearings and and seals (not included).
seal not included. Part No. Description
Note: Both rotors will work with Allstar Performance met- ALL42088 ALL42092 Rotor with 5 on 4-1/2" B.C.
ric spindles ALL56318 or ALL56319. ALL42093 Rotor with 5 on 4-3/4" B.C. ALL42092

1979-81* Related Parts
Part No. Description Part No. Description
ALL42085 Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. ALL72161 Spindle Lock Kit
ALL42086 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. ALL72165 Front Hub Dust Cap ALL72161
*Outer bearing race has a 1.97" O.D. ALL72308 Master Bearing and Seal Kit
ALL72126 Hub Seal
Related Parts For 1979-81 Style Rotor ALL72270 Inner Bearing
Part No. Description ALL72280 Inner Bearing Timken
ALL72160 Spindle Lock Nut Kit ALL72277 Outer Bearing ALL72165
ALL72164 Front Hub Dust Cap ALL72281 Outer Bearing Timken ALL72308
ALL72305 Master Bearing And Seal Kit
ALL72128 Hub Seal ALL72160
ALL72275 Inner Bearing
ALL72282 Inner Bearing Timken GM Rear Brake Rotor ALL42095
ALL72277 Outer Bearing Hat style brake rotor with 5 on 4-3/4" pattern
ALL72284 Outer Bearing Timken can be used with ALL42180 and ALL42181 7.5"
ALL72164 metric caliper brackets and stock type axles.
1982-88 † ALL72305 11-5/8" vented rotor is .790" thick and has a
2.800" I.D. center indexing hole to work with
Part No. Description
ALL42087 Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. most metric style axle flanges with a maximum
ALL42088 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. O.D. of 6".
†Outer bearing race has a 1.78" O.D.
40 Vane Directional Rotors
Related Parts For 1982-88 Style Rotor
Heavy duty 40 vane brake rotors provide added
Part No. Description
ALL72164 Front Hub Dust Cap strength and cooling over standard 36 vane ro-
ALL72306 Master Bearing And Seal Kit tors. 11.75" x 1.25" 8 bolt rotors weigh just 11
ALL72128 Hub Seal pounds and have ball milled slots to keep rotor
ALL72275 Inner Bearing clean.
ALL72282 Inner Bearing Timken Part No. Description
ALL72278 Outer Bearing
ALL72306 ALL42004 LH 1.25" x 11.75" 8-Bolt
ALL72283 Outer Bearing Timken ALL42005 RH 1.25" x 11.75" 8-Bolt ALL42004
Granada Brake Rotor 36 Vane Directional Rotors
Rotor is often used when converting stock Rotors have 36 directional cooling vanes
Mustang II brake assemblies to 11" O.D. x and are 1-1/4" thick x 11-3/4" dia. Direc-
.875" brake rotors and larger calipers. Rotors tional cooling vanes allow brakes to run much
include new bearing races and install directly cooler than conventional rotor designs. Rotors
to Mustang II spindles with stock bearings and fit solid mounting brake hats or hubs.
seals (not included).
Part No. Description
Part No. Description ALL42090 ALL42000 LH 1.25" x 11.75" 8-Bolt
ALL42090 Rotor With 1/2"-20 Wheel Studs, 5 On 4-1/2" B.C. ALL42001 RH 1.25" x 11.75" 8-Bolt ALL42000
ALL42091 Rotor With 1/2"-20 Wheel Studs, 5 On 4-3/4" B.C.
ALL42089 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C.
Related Parts
Part No. Description Rotor Bolt Kit ALL42026
ALL72161 Spindle Lock Kit Grade 5, 5/16" bolts fasten disc
ALL72165 Front Hub Dust Cap brake rotors to rotor hat or hub.
ALL72308 Master Bearing And Seal Kit ALL72161
ALL72126 Hub Seal Includes ten bolts, ten washers and
ALL72270 Inner Bearing ten self-locking nuts.
ALL72280 Inner Bearing Timken
ALL72277 Outer Bearing ALL72165
ALL72281 Outer Bearing Timken
ALL72308

9