Page 13 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

BRAKE
ALL42079
GM Caliper Bolts
Replacement caliper bolts fit most
GM calipers and allow for easy installation
and removal. Bolts feature a built-in
sleeve to allow for extra caliper travel.
Package of 2.
Part No. Description
ALL42079 Socket Head, 3/8" Allen
ALL42080 Hex Head, 5/8" Wrench
Brake Caliper Bolt
Retainer Kit ALL42050
Aluminum kit places lower
plate (with retainer clip) under
the caliper mounting bolts. The
upper plate (with hex hole ends)
clips into place and slips over bolt
heads to prevent them from turn-
ing. Includes 5/8" hex head bolts. 3-1/2" bolt spacing. on 3-1/4" centers work well with
GM Caliper Spacers ALL42040
Aluminum spacers for use with stock
or stock design aftermarket calipers
and thin rotors. Spacers keep the piston
safely in the bore of the caliper. Choose
from large GM style or midsized GM metric caliper. Spacers
are sold each and may need additional clearance depending on
caliper used.
Part No. Description
ALL42039 GM Metric, .100" Thick
ALL42040 GM Metric, .190" Thick
ALL42041 Big GM, .190" Thick
Caliper Spacers
Aluminum spacer is designed to work
with non-bridge bolt pads such as Wil-
wood Superlite, Hawk HB101 series and
Performance Friction 7751. Sold each.
Part No. Description
ALL42042 0.119" Thick
ALL42043 0.190" Thick
Hanging Brake Pedal Assembly ALL41014
Universal brake pedal as-
sembly includes everything
to install a new hanging
brake pedal and is ideal
when replacing older style
floor mounted brake pedal
with under floor master cylinder, to
a more convenient firewall location.
Firewall mounted bracket is pre-drilled
to accept Allstar power brake boosters
or most manual brake master cylinders
and includes a dash support bracket.
Multiple pedal mounting holes allow arm
to be positioned 5-7/8" to 11-7/8" from
firewall mounting plate in 1-1/2" increments for desired pedal
placement. Included 3/8"-24 clevis and threaded pushrod may be
cut and re-threaded as needed depending on final pedal location. ALL41007 ’55-64 Chevy, 7", Single Diaphragm, Standard Finish
90° Hanging Brake Pedal Assembly ALL41013
Universal pedal mount positions the booster
ALL42080 and master cylinder under the dash 90
degrees to the firewall for a clean under hood
appearance and is ideal for vehicles that sim-
ply do not have room in the engine compart-
ment for a booster or master cylinder. Bracket has
provisions to accept Allstar power brake boosters or
to mount a master cylinder directly to the bracket for
manual brake applications. Welding required to mount
pedal tab to pedal.
Corvette Style Master Cylinders
Dual reservoir master cylinders have
1" bores and outlet ports on both
sides for easy plumbing and instal-
lation. Popular master cylinders are
used with disc/disc and disc/drum
applications. Slotted mounting holes
ALL41060
Allstar 7" and 8" brake boosters.
Part No. Description
ALL41060 Cast Iron With 3/8" Ports
ALL41061 Aluminum With 3/8" Ports
ALL41062 Cast Iron With 1/2" And 9/16" Ports
Big Bore Master Cylinder ALL41064
Master cylinder with large 1-1/4" bore
works well on vehicles that require
increased volume for proper braking or
as an option when experiencing exces-
sive pedal travel with standard 1" bore
Corvette style master cylinders. Cast iron
master cylinder features a deep hole piston
for use with manual or power brakes. Front
brake port accepts 3/16" steel brake line with 3/8"-24 inverted
flare nut. Rear brake port accepts 1/4" steel brake line with
1/2"-20 flare nut (using included adapter) or 9/16"-18 flare nut by
removing adapter.
Master Cylinder Remote Reservoirs
High-impact plastic remote reservoirs simplify
brake bleeding, especially when master cylinder is
mounted low in the chassis. Available with single
or dual outlet and may be connected to master
cylinder with a 5/16" hose.
Description
Part No.
ALL42045 Single Outlet
ALL42046 Dual Outlet
Power Brake Boosters
Boosters are available in 7" or 8" diam-
eter and fit Allstar brake pedals as well
as other aftermarket units. For use with
ALL41060-41062 master cylinders. The 7"
booster is 3-3/4" deep, the 8" booster is
5-1/2" deep.
Part No. Description
ALL41005 7", Single Diaphragm, Universal
ALL41006 8", Dual Diaphragm, Universal
ALL41008 ’55-64 Chevy, 7", Single Diaphragm, Chrome
ALL41009 ’55-64 Chevy, 8", Dual Diaphragm, Standard Finish
11