Page 387 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Lithium Powerpack 12-Volt Battery LPBC680 Lithium Powerpack 16-Volt Battery
Lightweight, 12-volt battery features world And Battery Charger Combos
class lithium performance at an affordable price. Combo packages include a Lithium Pow-
“C” series battery is designed to be alternator erpack 16-volt battery and Intellicharger
compatible. Battery includes fast cell balanc- battery charger. Fully automatic bat-
ing for safety, long life and maximum capacity. tery charger produces 15 amps @
Requires 12-volt Intellicharger. 18.4 volts, and includes LCD sta-
Amp Reserve tus indicators for voltage, amper-
Part No. Description Hours Minutes Weight age, state-of-charge, amp hours
LPBC680 12-Volt Battery 11 26 4 lbs.
charged and time on-charge. “L”
Lithium Intellicharger Battery Chargers series batteries include low volt- LPBL925-16ACK
age MOSFET protection, while “T”
Designed for charging lithium-ion batteries, series are for total-loss electrical systems without an alternator.
Intellicharger is offered in 12- and 16-volt
Amp Reserve
versions. Fully automatic battery chargers Combo Kit Battery Only Description Hours Minutes Weight
Part No.
Part No.
include LCD status indicators for voltage, “L” Series
amperage, state-of-charge, amp hours charged LPBL925-16ACK LPBL925-16A 16-Volt L925 11 26 6.6 Lbs.
and time on-charge. LPBL1600ACK — 16-Volt L1600 20 53 10.1 Lbs.
“T” Series
Part No. Description LPBT680-16CK LPBT680-16 16-Volt T680 11 26 4.63 lbs.
LPB1008 16-Volt Battery Charger, 14 Amp Charge Rate LPBT1600CK LPBT1600 16-Volt T1600 20 46 9.63 lbs.
LPB1011 12-Volt Battery Charger, 17 Amp Charge Rate
LPB1012A 12-Volt Battery Charger, 15 Amp Charger Rate

Anchor-Tight Locking Header Tether System Kits
Flexible Transmission Dipsticks A tried and proven secondary
Flexible dipstick assemblies include a lock- retention method for headers with
removable collectors that meets
ing mechanism that meets NHRA/IHRA requirements. Choose NHRA standards. System kits
transmission, fi rewall or direct mount with brite or black anodized ensure that the collectors remain
aluminum, or black stainless handles. Direct mount are suited attached if the primary bolts or tabs fail. Premium, stainless steel
to dragsters where a short dipstick is accessible. Spare bottom kits allow easily changing collectors, utilizing T-bolt clamps and
fi tting assemblies are ideal for spare transmissions.
cut-to-fi t tether cables for retention.
Brite Black Black SS
Application Part No. Part No. Part No. Part No. Description
Aluminum Powerglide, 3" Direct Mount LOK1209124 LOK1209127 — LOK1400091 Kit For 2" Primaries, 3" Collectors
Aluminum Powerglide, Trans. Mount LOK1210134 — — LOK1400103 Kit For 2-1/4" Primaries, 4" Collectors
Aluminum Powerglide, Firewall Mount LOK1210144 LOK1210147 LOKX1210147 LOK1400116 Kit For 2-3/8" Primaries, 4" Collectors
Aluminum Powerglide, LOK1400117 Kit For 2-3/8" Primaries, 4-1/2" Collectors
Spare Bottom Fitting LOK1208114* LOK1208117* — LOK1400109 Kit For 2-1/2" Primaries, 4-1/2" Collectors
TH-350/TH-400, 3" Direct Mount LOK1209144 LOK1209147 — Note: Merge collectors must be measured at the valley, or smallest diam-
eter of the merge.
TH-350/TH-400, Firewall Mount LOK1211144 LOK1211147 —
TH-350/TH-400, Spare Bottom Fitting LOK1208144* — —
TH-400, Trans. Mount LOK1213134 — —
Chrysler 727, Trans. Mount LOK1211434 — — Push/Pull Throttle Cable Mounting
Chrysler 727/904/518, Firewall Mount LOK1211444 LOK1211447 – Bracket And Spring Return Kits
* Signifies spare bottom fitting assembly only (no dipstick provision).
Made to deliver
smooth, reliable throttle
Cage Mount Dial-In Board control, kits are de-
LOK1110114 signed for use with
Typically used on dragsters or road- Morse-style throttle
sters where dial-in polish is impractical. cables using single, or LOK1010118
Ball milled, 6061-T6 billet aluminum dual cylinder in-line throttle stop fi tted to a Holley Dominator style
bracket is polished to a brilliant fi nish carburetor. Bracket is CNC-machined from black anodized alu-
and mounts directly to 1-5/8" diameter minum and installs between the carburetor and intake manifold,
chassis tubing. and is drilled for scoop tray studs. Sold complete with necessary
hardware.
Billet Safety LED Taillight Part No. Description
4500 Push/Pull Throttle Mounting Bracket And Return Spring Kit,
LOK1110154 LOK1010118 4-Hole Plenum
Polished, billet aluminum safety LED LOK1010128 4500 Push/Pull Throttle Mounting Bracket And Return Spring Kit,
taillight attaches directly to any Lokar Open Plenum
Dial-In Board.

385