Page 185 - 2020 Allstar Performance Parts and Equipment Catalog

STEERING

Inner Tie Rod Stud ALL56278 Bump Steer Kit ALL18600
Stud replaces the stock inner tie rod end, Kit includes a 5/8"-18 x 3" bolt and
allowing a 5/8" rod end to be used on 4 spacers (.100", .200", .300"
both ends of the steering link. Inner and .500").
tie rod stud and rod end combina-
tion also provides additional steering Bump Steer Spacer Kit ALL18601
clearance compared to O.E. style
inner tie rod and crossmember. Steel spacers have a 5/8" I.D. and are
commonly used to space a
steering rod end when cor-
Bump Steer Studs recting bump steer. Kit includes 7 spacers, one of each
Studs have 1-1/2" per foot taper and sim- size: .030", .060", .100", .200", .300", .400" and .500".
plify bump steer setting. Attach outer tie Individual Spacers (2-Pack)
rod end to spindle so end can be raised or ALL18602 ..... .030" ALL18606 ...... .300"
lowered as needed. Self locking nuts, one ALL18603 ..... .060" ALL18607 ...... .400"
.100"spacer and three .300" spacers ALL18604 ..... .100" ALL18608 ...... .500"
included. ALL56286 also includes a ALL18605 ..... .200"
.500" spacer. ALL56280
ALL56280 ..... Bump Steer Kit (Inner), Rack Eye Taper Tie Rod Spacer ALL56288
ALL56284 ..... Bump Steer Kit (Outer), Pinto Taper Spacer corrects bump steer on vehicles that use
ALL56286 ..... Bump Steer Kit 1" Longer Shank Than ALL56284 a rod end as an outer tie rod end. Spacer is used
between the spindle arm and the rod end. Steel
.750" spacer is 2" tall and has a 5/8" hole.
.750" 4.500" 1.625"
3.500" 1.625" 1.750" 1.385"
1.750" 1.385" 3.385"
2.385" Rack And Pinion Spacers
Place aluminum spacers between
chassis and rack assembly to help
achieve proper front end geometry.
Three thicknesses available.
ALL52350 ..... 3/8" Thick
ALL56280 ALL56284 ALL56286 ALL52351 ..... 1/2" Thick
ALL52352 ..... 3/4" Thick

Steering Rack
Set Up Tool ALL10668
Boot Cover
Tool replaces the front coil-over shock assembly to
simulate range of front suspension movement for ALL52345
checking bump steer and roll center. Hex head Neoprene cover fits most
threaded shaft raises and lowers suspension to simulate steering racks and helps protect against rocks
racing conditions. Jam nuts can be positioned to limit and debris. Hook-and-loop closure makes installa-
rebound and compression. Not designed to support tion and removal simple.
total vehicle weight, only suspension components.
Toe Plates
Aluminum plates simplify
setting of toe-in and toe-out. ALL10117
Set Up Plates Plates fit against out-
Set-up plates are side edges of tires. Using
used for squaring ALL10660 two tape measures (sold
and stringing chassis to separately), measure the dis-
ensure accurate chassis tance between plates front
set-up by eliminating and rear. The difference
wheel and tire differ- in tape readings is the toe ALL10119
ences. Plates are 1/2" setting. Deluxe plates have
thick and can also be radiused edges, slots for narrow and wide tape measures
used when setting bump ALL10662 and are 9" tall x 23" wide to work with vehicles with
steer or checking axle tubes for straightness. Sold each. smaller wheel openings. Standard plates are 1/2" thick,
ALL10660 ..... 5x5, 7" x 28" 11" tall x 32" wide and work well for vehicles with larger
ALL10662 ..... Wide 5, 12" x 28" wheels and wheel openings. Set of two plates.
ALL10117 ...... Standard
ALL10119 ...... Deluxe
www.allstarperformance.com 183