Page 188 - 2020 Allstar Performance Parts and Equipment Catalog

SUSPENSION Screw-In Upper Ball Joint Low Friction

Upper Ball Joints
ALL56214 (K772)
Low friction, economical OEM ball joints are
Most popular upper joint used. Originally used
high performance units designed for smooth
in Dodge, Chrysler and Plymouth cars. Fits
Allstar ball joint holders and Lefthander chassis
with longer than stock pin length for correcting
style upper control arm or where a screw-in type
ball joint is required. Replaces AFCO 20034. suspension travel. Some ball joints are available
roll centers. Ball joints have hardened pins with
1-1/2" taper per foot. stock type housings and are not rebuildable.
Legal for classes that require non-take apart
ball joints. For off-road use only.
Bolt-In Upper Ball Joints Part No. Type Length Taper Per Ft.
Replaces ALL56214 (K772)
ALL56204 (K6024)
ALL56010 Screw-In Standard 1-1/2"
Fits UB Machine style upper control arm ALL56011 Screw-In 1/2" Longer 1-1/2"
where a bolt-in style ball joint is required. ALL56012 Screw-In 1" Longer 1-1/2"
Replaces AFCO 20031. Outer mounting bolt Replaces ALL56204 (K6024)
holes are 2.82" CTC. 1-1/2" taper per foot. ALL56014 Bolt-In Standard 1-1/2"
Replaces ALL56208 (K6136)
ALL56208 (K6136) ALL56015 Bolt-In 3/8" Longer 1-1/2"
Replaces ALL56220 (K5208)
Bolt-in type joint fits Impala spindle. ALL56018 Bolt-In Standard 2"
Can be used to raise roll center on Street ALL56019 Bolt-In 1/2" Longer 2"
Stock and modified cars. Fits Impala, ALL56020* Bolt-In 1" Longer 2"
Camaro and Chevelle spindles. Replaces * NEW!
AFCO 20032-1. Outer mounting bolt holes are
2.82" CTC. 2" taper per foot. Adjustable
Upper Ball Joints
ALL56220 (K5208)
With mono-ball joints, upper
Fits full-size 1971-94 Impala spindles. Also control arm angles can be
fits 1971-81 Camaro and 1973-88 Chevelle/ adjusted. Joints include plate,
Monte Carlo. Replaces AFCO 20032. Outer ball, tapered shaft, adjuster
mounting bolt holes are 2-1/2" CTC. 2" taper bushings and nut.
per foot.
ALL56260 ..... LH Large GM Joint ALL56267 ALL56260
(ALL56204 Style)
ALL56261 ..... RH Large GM Joint (ALL56204 Style)
Steel Upper Ball Joint Wrench ALL56264 ..... LH Mid-Size GM Joint (ALL56220 Style)
ALL11190 ALL56265 ..... RH Mid-Size GM Joint (ALL56220 Style)
Easily remove and install ALL56267 ..... Adjustable Screw-In Upper Ball Joint (ALL56214 Style)
small body (ALL56214) Chrysler ball joints. Replacement Parts
ALL56262 ..... Stud For ALL56260, ALL56261 And ALL56267
ALL56266 ..... Stud For ALL56264 And ALL56265
Ball Joint Spreader Tool ALL11174 ALL99098 .... Replacement Mono Ball Bearing 5/8"
Tool separates ball joint from the spindle. Inside of
cylinder is shaped to fit over tapered stud of most Ball Joint Sleeves
ball joints and presses against stud of other ball Steel sleeves allow custom fabrication
joint. Not for use on FWD or 4WD applications. of control arms. ALL56250
Tool is 4" tall fully collapsed and 6" ALL56250 ..... Small Screw-In ALL56214/ALL56217 (K772/K719)
tall fully extended. ALL56251 ..... Large Screw-In ALL56216 (K727)
Related Parts ALL56252 ..... Large Press-In ALL56206 (K6141)
ALL11175 ...... 1" Extensions (Set of two) ALL11175 ALL56253 ..... Med. Press-In ALL56212 (K6117)

Jason Hughes Photo: Tyler Rinken Frank Heckenast, Jr. Photo: Marcus Berglund
186 www.allstarperformance.com