Page 191 - 2020 Allstar Performance Parts and Equipment Catalog

Ball Joint Holders Slotted Upper Control Arm
Bracket Kit ALL60077 SUSPENSION
Kits contain (2) slotted brackets, (2) centered
bushings, (2) reducer spacers for 5/8" rod end
and a 1/2" bolt and nyloc nut. Offset alu-
minum bushings (sold separately) allow for
ALL56296 plenty of adjustment options.
ALL56294 ALL56295 ALL56290 ALL56292 ALL56297
Holders are ideal for those who fabricate their own Insert Bushings
control arms. The holders have a 5/8" male RH thread ALL60080 ........... Centered Bushings (Pair)
and a 3/8" hole, commonly used with a clevis. Holders ALL60081 ............ 1/8" Offset Bushings (Pair)
accept ALL56214 or Moog K772 style screw-in ball joints, ALL60082 ............ 1/4" Offset Bushings (Pair)
sold separately. ALL60083 ............ 3/8" Offset Bushings (Pair)
ALL60084 ........... 1/2" Offset Bushings (Pair)
ALL56290 ..... LH Angled Stud, Angled Tab, Standard Spread
ALL56292 ..... RH Angled Stud, Straight Tab, Standard Spread
ALL56294 ..... LH Angled Stud, Angled Tab, Wide Spread
ALL56295 ..... RH Angled Stud, Straight Tab, Wide Spread Upper Control Arm Brackets
ALL56296 ..... Universal Straight Stud, Straight Tab, Wide Spread ALL60025
ALL56297 ..... Universal Design (ALL56296) Angled At 15° Stamped 3/16" mild steel brackets weld to
ALL56194 ..... 5/8" RH Steel Clevis (Commonly Needed) chassis as a mounting point for upper
ALL56214 ..... Screw-In Ball Joint (Most Common)
control arm. Brackets have two 5/8"
holes, spaced 7/8" apart for adjustment.
Unwelded
May be trimmed to desired height. Package of 2.
Ball Joint Holder Kit ALL56298
Kit allows components to
be welded at any angle.
Stud is 5/8"-18RH thread, Set-Up Plates
bracket has a 3/8" hole. Set-up plates are used for
Holder accepts ALL56214 or squaring and stringing chassis ALL10660
Moog K772 style screw-in upper ball joint. to ensure accurate chassis
set-up by eliminating wheel
Female Double Adjusters and tire differences. Plates
are 1/2" thick and can also
Steel double adjusters increase adjustment be used when setting bump
capability of control arms, trailing arms, steer or checking axle tubes
Panhard bars, tie rod ends and other for straightness. Sold each. ALL10662
items using threaded tube. Adjuster
includes two jam nuts. ALL10660 ..... 5x5, 7" x 28"
ALL10662 ..... Wide 5, 12" x 28"
ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long
ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long
Steel and Aluminum Clevises Storage Tote

.230" ALL059
.230"
1.000" Durable storage tote has
many uses around the
shop or in the trailer. Store
extra parts or keep parts
4.000" from being damaged during
3.460"
storage. Great for organizing
2.000" ratcheting tie downs, specialty
tools, such as tire groover, siper and
related tools. Totes also work well for storing chemicals
ALL56192, ALL56193 ALL56194
and fluids to prevent spilling in cabinets. Interlocking
3/4" clevises attach strut rod to A-frame (3/4"-16 thread
with a 1/2" hole). 5/8" clevises, commonly used with lid design allows multiple totes to be securely stacked
Lefthander style upper A-arms, connect to ball joint together. Inside dimensions are 20" L x 14" W x 12" H.
holder (5/8"-18 thread with a 3/8" hole).
ALL56192 ..... 3/4" RH Steel
ALL56193 ..... 3/4" RH Aluminum
ALL56194 ..... 5/8" RH Steel

www.allstarperformance.com 189