Page 194 - 2020 Allstar Performance Parts and Equipment Catalog

SUSPENSION Lower Control Arm Coarse Thread Weight Jack Bolts ALL56106

Weight jack bolts have 1"-8 threads
Limit Clamps
for quick adjustment. Use
Clamps fasten around tubular lower
with ALL56113, ALL56114 and
control arms providing a lower mounting
point for a suspension limit chain. Clamps
are double shear style and accept 5/16"
ALL56106 ..... 8" Steel
ALL56107 ..... 11" Steel
hardware. ALL56115 style spring plates.
ALL68340 ..... 1"
ALL68341 ..... 1-1/8" Weight Jack Bolts
ALL68342 ..... 1-1/4" With Internal Thread
Bolts have a 7/16"-20 internal ALL56095
Lower Control Arm Kits thread on one end for use with
Universal kits are 2" longer bolt-on and swiveler spring cups.
than standard arms Coarse thread bolts have 1"-8 outer threads
and must be cut while fine thread bolts are 1-1/8"-12.
to length before Coarse Thread 1"-8 With 3/4" Hex
welding slug into ALL56186 ALL56094 ..... 4" Steel
place. Ball joint sold separately. ALL56095 ..... 6" Steel
ALL56186 ..... LH Kit, Use With Screw-In Ball Joint (ALL56216) ALL56066 ..... 8" Steel
ALL56187 ..... RH Kit, Use With Screw-In Ball Joint (ALL56216) ALL56067 ..... 11" Steel
Fine Thread 1-1/8"-12 With 1/2" Square Drive
Cross Member Bushings ALL56090 ..... 6" Aluminum
ALL56091 ..... 8" Aluminum
ALL56188
ALL56092 ..... 6" Steel
Bushings mount on the inside ALL56093 ..... 8" Steel
end of a strut-style lower
control arm to act as a spacer Jam Nuts
between each side of the 3/4" inner rod For Jack Bolts
end and the crossmember. Package of 2.
Steel jam nuts for jack bolts ALL56068 ALL56110 ALL99052
Double Adjusters ALL56068 ..... 1"-8 (Coarse) 1-1/8" Wrench
ALL56110 ..... 1"-8 (Coarse) 1-1/2" Wrench
Steel double adjusters increase adjustment ALL99052 ..... 1-1/8"-12 (Fine) 1-3/8" Wrench
capability of control arms, trailing arms,
Panhard bars, tie rod ends and other Weight Jack Bolt Collars
items using threaded tube. Adjuster
includes one LH and one RH jam nut. Steel collar typically welds onto frame or
chassis for installation of a threaded jack bolt.
ALL56196 ..... 5/8"-18 RH Male/LH Male, 4-1/4" Long Collar includes grease fitting.
ALL56197 ..... 3/4"-16 RH Male/LH Male, 5" Long
ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long ALL56099 ..... 1"-8
ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long ALL56098 ..... 1-1/8"-12

Short GN Strut Bar Weight Jack Bolt Sleeves
ALL56190 Weld-in mild steel sleeve provides a mounting
point for jack bolts or adjustable shock mounts.
Fits lower strut arm on strut bar Sleeves are 2" long and have a 1-3/8" O.D. for
chassis. Bar has 3/4"-16 LH threads (3" long). Hole spacing is welding onto chassis tubing.
2-1/2". ALL56073
ALL56109 ..... 1"-8, Coarse Thread
ALL56073 ..... 1-1/8"-12, Fine Thread

Weight Jack Plate ALL56112
Heavy-duty steel plate has a threaded boss
welded to the center to accept jack bolts with
1"-8 coarse threads. O.D. is 5".

Coarse Thread Nut With Sleeve
ALL56111
Steel coarse thread nut with sleeve has 1"-8
coarse threads.

Brian Campbell Photo: RW Motorsports
192 www.allstarperformance.com