Page 199 - 2020 Allstar Performance Parts and Equipment Catalog

Roller Skate Wheel Shock Shims
Bump Stops NEW! Uniquely designed shock shims are SUSPENSION
Poly bump stops are 1" tall with placed directly onto the shock shaft to
a 5/8" diameter hole. simplify fine tuning of the chassis
without disassembling the shock
ALL64510 ..... 50 Durometer
ALL64511 ..... 55 Durometer or even removing the shock
ALL64512 ..... 60 Durometer from the chassis. Kits include a
ALL64514 ..... 70 Durometer variety of shim designs and sizes
for convenient tuning and set-up. ALL64404
Adjustable Poly NEW! Size Starter Kit Standard Kit Deluxe Kit
Bump Stop Kit ALL64505 14mm ALL64400 ALL64402 ALL64404
16mm ALL64440 ALL64442 ALL64444
Polyurethane bump stop is
weather resistant and easily Starter Kit
adjustable by adding packers to Includes: U-Shaped Shims 1/16" (4 pcs), 1/8" (4 pcs) and
the inner ring. Five 1/16" thick 3/8" (2 pcs); Semi-Solid Shims 1/16" (4 pcs) and 1/8" (4 pcs).
packer shims included in the kit.
Standard Kit
Includes: U-Shaped Shims 1/16" (12 pcs), 1/8" (12 pcs) and
Shock Bump Rubbers 3/8" (6 pcs); Semi-Solid Shims 1/16" (12 pcs) and 1/8" (12
Conical bump rubbers fit on most shock shafts pcs); 2-Piece Collar Shims 1/2" (2 pcs), 3/4" (2 pcs) and 1"
up to 16mm to limit shock travel. Bump rub- (2 pcs); Storage Case.
bers are 2-3/8" tall and have a 2" O.D. base. Deluxe Kit
A letter designation is molded in the bottom Includes: U-Shaped Shims 1/16" (12 pcs), 1/8" (24 pcs) and
to identify compound.
3/8" (10 pcs); Semi-Solid Shims 1/16" (12 pcs) and 1/8"
ALL64500 ..... Soft (40 grams) (24 pcs); 2-Piece Collar Shims 1/2" (6 pcs), 3/4" (6 pcs) and
ALL64501 ..... Medium (50 grams) 1" (6 pcs); Storage Case.
ALL64502 ..... Hard (55 grams)
Shock Shim Components
Bump Spring Cups
Lightweight bump spring U-Shaped Shims - Designed for quick removal
cups are made from 6061-T6 aluminum and have and installation into tight stacks and locations
a black anodized finish. Cups feature a bronze where twisting the shim into the stack is not
bushing, allowing the shock shaft to move freely an option or when the car is on the ground. ALL64412
during suspension travel. Cups have a 2" O.D. Commonly used for fine tuning the suspension.
sized for Hypercoil and most Landrum Semi-Solid Shims - Designed for quick removal,
bump springs. Two are required and providing a secure installation that will not fall out
should closely match bump spring I.D. yet requires 3/4" of space to install or remove. ALL64416
size to appropriate bump spring cup Typically installed when the vehicle is off the ground.
step O.D. size from chart. Sold each. Commonly used for fine tuning the suspension.
2-Piece Collar Shims - Designed to attach
Cup Step OD “B” around the shaft of the shock and secure in
Shaft Sz. “A” 1.160" 1.200" 1.280" place with a zip tie. Commonly used during initial
14mm ALL64348 ALL64349 ALL64350 set-up or to take up a large amount of travel. ALL64420
1/2" ALL64352 ALL64353 ALL64354
16mm, 5/8" ALL64356 ALL64357 ALL64358 Description 2-Pack 10-Pack 25-Pack
14mm (.550")
U-Shaped Shim 1/16" – ALL64410 ALL64410-25
U-Shaped Shim 1/8" – ALL64412 ALL64412-25
U-Shaped Shim 3/8" – ALL64414 ALL64414-25
Semi-Solid Shim 1/16" – ALL64416 ALL64416-25
Semi-Solid Shim 1/8" – ALL64418 ALL64418-25
2-Piece Collar Shim Kit 1/2" ALL64420 ALL64420-10 –
2-Piece Collar Shim Kit 3/4" ALL64422 ALL64422-10 –
2-Piece Collar Shim Kit 1" ALL64424 ALL64424-10 –
16mm (.630")
U-Shaped Shim 1/16" – ALL64450 ALL64450-25
U-Shaped Shim 1/8" – ALL64452 ALL64452-25
U-Shaped Shim 3/8" – ALL64454 ALL64454-25
Semi-Solid Shim 1/16" – ALL64456 ALL64456-25
Semi-Solid Shim 1/8" – ALL64458 ALL64458-25
2-Piece Collar Shim Kit 1/2" ALL64460 ALL64460-10 –
2-Piece Collar Shim Kit 3/4" ALL64462 ALL64462-10 –
2-Piece Collar Shim Kit 1" ALL64464 ALL64464-10 –
Billy Moyer, Jr. Photo: Marcus Berglund
www.allstarperformance.com 197