Page 195 - 2020 Allstar Performance Parts and Equipment Catalog
P. 195
Coil-Over Load Bolt Assembly Extended Length “Swiveler”
ALL56074 Spring Cup ALL56079 SUSPENSION
Threaded aluminum bolt is 6" long with 1-1/8"-12 Extended length cup helps keep spring
fine threads and is commonly used on big bar, soft centered. Also keeps spring from falling out
spring cars. Load bolt offers the ability to easily on some modern day long drop suspension
change corner weights, change the center-to- packages.
center distance of the shock, adjust bump stop
distances without adding shims and adjust ride “Swiveler” Spring Cups
height without running out of shock travel.
Commonly used with ALL56098 threaded sleeve. Swiveler cup is used in place of a standard upper spring
plate and weight jack bolt on vehicles using conventional
ALL56075 ..... Replacement Shock End
style coil springs. Mono-ball stud mount allows cup to
pivot as needed to prevent binding during suspension
travel and requires a weight jack bolt with a 7/16"-20
Upper Spring Cups internal threaded end for proper installation.
Steel cups work with most 5" and 5-1/2"
O.D. springs and either 1" or 1-1/8" jack bolts. Welded Style ALL56080
ALL56114
ALL56114 ..... Standard Cup For 5" Spring The sleeve and top are welded together
ALL56115 ..... Oversized Cup For 5-1/2" Spring on this unit to fit most applications using a
5" conventional spring.
Lightweight Pro-Series
Upper Spring Cup ALL56113 Components bolt together to select the
desired spring top plate and sleeve sepa-
Lightweight steel cup works with most 5"
and 5-1/2" O.D. springs and either 1" or rately to build custom size cups. ALL56077
1-1/8" jack bolts. ALL56077 ..... Spring Top Plate For 5" Spring
ALL56078 ..... Spring Top Plate For 5-1/2" Spring
ALL56086 ..... 3-1/4" Spring Sleeve
ALL56087 ..... 3-1/2" Spring Sleeve
Bolt-On Upper Spring Cup ALL56088 ..... 3-3/4" Spring Sleeve
ALL56089 ..... 4" Spring Sleeve
ALL56097 ALL56085 ..... 4-1/4" Spring Sleeve ALL56086
Steel cup bolts to internal thread jack bolt
and keeps 5" or 5-1/2" spring centered to the Coil Spring Spacer ALL56116
jack bolt. Spacer for 5" racing spring welds into spring
pocket enabling chassis adjustments to
Street Stock and other race cars that are
not allowed to use weight jack bolts or
Extended Length
threaded adjusters. 3" tall spacer may be cut
Upper Spring Cup ALL56125 to desired height before installation. Use coil shim spacers
Commonly used in rear suspensions, cup con- ALL56120 and ALL56121 to make chassis adjustments.
nects to jack bolt with a 7/16"-20 bolt to help
maintain spring location. Extension sits 5" into Coil Spring Shims
the spring.
Used with ALL56116, or whenever weight
jack bolts are not allowed, to raise car height
for set-up purposes. 5" diameter, 3-5/8" I.D.
ALL56120 ..... 3/16" Shim
ALL56121 ..... 1/8" Shim
Adjustable Coil
Spring Spacers
Adjustable spacers for 5"
racing springs weld into
spring pockets enabling ALL56118 ALL56119
chassis adjustments to street stock and other race cars
that are not allowed to use weight jack bolts.
ALL56118 ..... All Steel Adjuster
Zach Westdorp Photo: RW Motorsports ALL56119 ..... Steel Sleeve With Alum. Adj. Nut
www.allstarperformance.com 193
