Page 190 - 2020 Allstar Performance Parts and Equipment Catalog

SUSPENSION Upper Control Arms Upper Control Arm Mounting Bracket

ALL60190
Powder coated, bushing style A-arms are
available with steel or aluminum cross
Bracket is flame cut from 1/2" thick
shaft and a straight or 10° ball joint
steel, with 6" bolt spacing. Welds to
position. Shaft bolt holes are 1/2"
diameter, spaced 6" on center. Tig
welded .095" D.O.M. tube construc-
Upper Control Arm Shims
tion. Bolt-in style arms accept ALL56204 or Moog ALL57906 frame and accepts upper A-arm.
K6024 ball joints. Screw-in style arms accept ALL56214 or Individual steel shims fit between the upper control arm
Moog K772 ball joints. and chassis mount to adjust caster and camber. Shims have
9/16" wide slots and easy-to-grasp tabs for
Bolt-In Bolt-In Screw-In 10° Screw-In 10° installation and removal. Package of 10.
Size Alum. Shaft Steel Shaft Alum. Shaft Steel Shaft
7" – – ALL57940 – ALL60200 ..... 1/16" (0.062")
7-1/4" – – ALL57941 – ALL60201 ..... 1/8" (0.125")
7-1/2" ALL57902 ALL57922 ALL57942 ALL57962 ALL60201
7-3/4" ALL57903 – ALL57943 – 1-Piece Upper Control Arm Shims
8" ALL57904 ALL57924 ALL57944 ALL57964
8-1/4" ALL57905 – ALL57945 – Dual mount shims fit between the upper control arm and
8-1/2" ALL57906 ALL57926 ALL57946 ALL57966 chassis mount to adjust camber. One-piece design works
8-3/4" ALL57907 – ALL57947 – with most mounts/control arms with 6" bolt spacing using
9" ALL57908 ALL57928 ALL57948 ALL57968 1/2" mounting hardware. Sold each.
9-1/4" ALL57909 – ALL57949 –
9-1/2" ALL57910 ALL57930 ALL57950 ALL57970 ALL60203 ..... 1/8" (0.125")
9-3/4" ALL57911 – ALL57951 – ALL60204 ..... 3/16" (0.185")
10" ALL57912 ALL57932 ALL57952 ALL57972 ALL60205 ..... 1/4" (0.250")
10-1/4" ALL57913 – ALL57953 – ALL60206 ..... 3/8" (0.375") ALL60205
10-1/2" ALL57914 ALL57934 ALL57954 ALL57974 ALL60207 ..... 1/2" (0.500")
11" ALL57916 ALL57936 ALL57956 ALL57976 ALL60208 ..... 3/4" (0.750")
ALL60209 ..... 1" (1.00")
ALL60210 ..... 7-Piece Kit, Includes ALL60203-60209 (1 of each)
Metric
Upper Control Arms Caster Kit
Measure your front end
Upper control arms fit stock, 6-7/8" NEW!
mounts, found on Mid-size GM caster by attaching an
metric frames. Use with bolt-in style adapter and level holder to your upper
ball joint, Allstar 56220 or Moog ball joint threads. Additional adapters
K5208. Steel control arms have a ALL57990 may be purchased separately for other
steel cross shaft with holes spaced 6-7/8" on center. use. Digital Level sold separately.
ALL11162 ...... Kit With Holder, BJ Adapters And Carry Case (No
ALL57990 ..... RH, 8" Digital Level)
ALL57992 ..... LH, 8-1/2" ALL11164 ...... Holder Only For Digital Level
ALL57994 ..... LH, 9" ALL11165 ...... Quickchange Pinion Angle Adapters (2)
ALL57995 ..... LH, 9-1/2" ALL11166 ...... Late Model Spindle Adapter
ALL57996 ..... LH, 10"
ALL10742 ...... 2x2 Digital Level
Caster Plate ALL10752
IMCA Legal Not sure if you turned your wheels the same
Upper Control Arms amount each time when adjusting caster
IMCA legal upper control arms fit settings on your race car? Unless you have
stock 6-7/8" mounts, found on expensive turn plates, you’re never certain, until now. This
mid-size GM Metric frames. Use with quick reference gauge positions under the upper ball joint
bolt-in style ball joint, Allstar 56220 nut, with markings facing up, for easy viewing. Place a
or Moog K5208. Steel control arms ALL57831 mark on the shock body or fabricate an indicator to use as
are available with steel or aluminum cross shaft and come a reference point.
complete with “IMCA certified” sticker.
Mono Ball Bearings
ALL57830 ..... RH, 8" With Steel Cross Shaft
ALL57831 ..... LH, 8-1/2" With Steel Cross Shaft Mono balls are commonly used in fabrication
ALL57832 ..... RH, 8" With Aluminum Cross Shaft of products including J-bars, control arms and
ALL57833 ..... LH, 8-1/2" With Aluminum Cross Shaft trailing arms. Bearings have an external grease
ring and orifice which allows the bearing to be installed in
custom applications that can be externally lubricated.
ALL58001 ..... 5/8"
ALL58002 ..... 3/4"
188 www.allstarperformance.com